Working Mode & Follow Speed - Hohem iSTEADY V2 Quick Start Manual

How to switch working modes by button?
Combination operation: Press and hold shutter button and tap power button
Single Tap: Pan&Tilt Follow (Default)
Double Tap: Pan Follow
Triple Tap: All Lock
Quartic Tap: POV (All Follow)
*Tips: To ensure proper operation, please release the shutter button after the power button.
Working Mode & Follow Speed
*For changing working mode or follow speed, please open Hohem Pro app - Start Recording - Gimbal
Parameter Settings
*Ensure the Bluetooth is connected and change the settings
Working Mode
Pan&Tilt Follow
This is the default working mode. When you rotate the handle left/right/tilt up/tilt down, the camera
will follow the handle movements, and the roll motor is locked without following the movement.
EN 07