Summary of Contents for Campania International FT-325
Page 1
FT-325 Meridian Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 3-5 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or other submersible lights are suggested for this fountain Pump Information: WP450LV - 120 GPH Pump (16 ft.
Page 2
FT-325 Meridian Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be diffi cult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-325 Meridian Fountain Assembly Instructions Step 7 - Feed both cords throught he PVC pipe in the basin (FT-325C) and out of the channel underneath. 7a - Note 1: Binding the 2 cords together with a zip tie, twist tie, or string makes this step easier.
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.