Download Print this page

Campania International FT-320 Assembly Instructions

Large m weave fountain

Advertisement

Quick Links

Fountain Components
Image
Item Description
Large M Weave
Fountain -
Water Feature
Large M Weave
Fountain -
Spiller Stopper
Large M Weave
Fountain -
Pump House
Large M Weave
Fountain -
Pump House
Door
Large M Weave
Fountain - Basin
FT-320 Large M Weave Fountain
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 20 gallons of water.
• This fountain uses a extra-large fountain cover: FTNCOV-XLG
• Compatible with both Refill Devices and LED kits
• A special stopper is NOT required to use the refill kit for this fountain.
Pump Information:
OEMPF525 - 525 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-320A
1
FT-320B
1
FT-320C
1
FT-320D
1
FT-320E
1
Assembly Instructions
Pump Kit Parts List
Image
Component
PK500 Pump
(use adapter indicated)
#7 drain stopper
12" length of 1/2" Black Non-kink
2" length of 5/8" clear tubing
2" length of 1/2" CPVC pipe
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
tubing
1
1
Wedges
3
1
rev 4/28/2020

Advertisement

loading

Summary of Contents for Campania International FT-320

  • Page 1 FT-320 Large M Weave Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a extra-large fountain cover: FTNCOV-XLG • Compatible with both Refill Devices and LED kits •...
  • Page 2 FT-320 Large M Weave Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
  • Page 3 FT-320 Large M Weave Fountain Assembly Instructions Step 9 - Place the spiller stopper (FT-320B) inside the top of the water feature (FT-320A). FT-320B (4 lbs) 29.25"L x 2.25"W x 0.75"H Step 10 - Place the pump cover door (FT-320D) in the pump access opening of the pump cover (FT-320C).
  • Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.