Summary of Contents for Campania International Dolce Nido FT-326
Page 1
FT-326 Dolce Nido Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 3-5 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: OEMPF140 - 140 GPH Pump (6 ft.
Page 2
FT-326 Dolce Nido Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 3
FT-326 Dolce Nido Fountain Assembly Instructions Step 8 - Center the water feature disc (FT-326A) in the center of the small bowl (FT-326B). Step 9 - Fill the fountain with water. FT-326A (6 lbs) 9.25"W x 3.75"H...
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.