Table of Contents
Advertisement
5. Configuring for Client Bride
Note :
1. This section will walk you through the steps of sharing (bridging) an internet connection in one building, and extending that
same internet to another building.
2. The "Main Base Station" provide Access Point with SSID "Main_AP"
3. The Two wire networks(LAN) need the same subnet.
4. The examples below are for Client Bridge.
Setting Up the Access Point (Main Base Station)
1. Follows steps in Section 3 Configuring the
Access Point.
2. Make sure changed options as below :
ESSID : Main_AP
Channel : 44
Security : WPA2-PSK
Cihper Type : AES
Pre-shared Key :
8
Advertisement
Table of Contents
