Scanning Basics - Microtek Medi-6000 Plus Quick Start Manual

Scanning Basics

Warning: Do not place more than one piece of X-ray film into the Feed Tray, for doing so will
damage the original film during the feeding process.
1. Launch ScanWizard Medi
To launch ScanWizard Medi as a stand-alone program,
double-click the ScanWizard Medi icon on your
desktop.
After ScanWizard Medi is started up the first time, the
Preview and Settings windows appear on the screen
automatically.
2. Load and Scan X-ray film
Load and insert the X-ray film into the Feed Tray,
with the side to be scanned facing up and with the
top end of the film directing upwardly.
Push the X-ray film into the tray until the edge of it
touches the bottom edge of the Feed Tray.
Once the film is detected by the digitizer, the
ScanWizard Medi will automatically recognize, auto-
crop, and perform a scan of the film and save it in
your preferred folder or application.
3. View the Image
Double-click the "MSmart Images" icon on the desktop to view the images.
NOTE: Your scan job can be carried out automatically with your own scanning
settings. For details on how to customize your scanning settings, refer to the Medi-
6000 Plus User's Manual.
Settings window
X-ray Film
Preview window
4
Guide Arms
(Used to
center the film
on the tray)