Table of Contents
Advertisement
Connect Digitizer
To the power cord
A. Connect the power cord to the left side
of the digitizer.
B. Plug one end of the power cord into a
wall outlet or other power source.
To the Hi-Speed USB cable
C. Connect one end of the Hi-Speed USB cable to your computer.
D. Connect the other end of the Hi-Speed cable to the digitizer's USB port, locating at
the left side of the digitizer.
E. Turn the power switch at the front-left panel of the
digitizer to "On"; once the scanner is detected by your
system, the LED lights on the front panel will brighten,
and the digitizer is ready to scan.
Power switch
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Medi-6000 Plus and is the answer not in the manual?
Questions and answers