Product Features - Ispring RO500AK Installation Instructions & Owner's Manual

1) Product Scope
A. For residential use ONLY.
B. Applicable water quality: municipal.
2) Water Treatment Process
Municipal tap water → Composite filter → Reverse osmosis filter → Post-activated carbon
filter (Alkaline filter on RO500AK model only) → Purified water
3) Filtration Performance
Stage Filter
st
1 Composite filter
Reverse osmosis
nd
2
membrane
Carbon block filter
rd
3 Alkaline Filter (On
RO500AK model only)
4) Specifications
Working Pressure
Working Temperature
Flow Rate of Purified Water
Power Specifications
5) Filter Service Life Table:
First stage composite filter
Second stage reverse osmosis membrane
Third stage carbon block filter
•
This system works at maximum performance when connected to a municipal water supply with
an inlet pressure of 60 psi and a temperature of 75°F.
•
The actual water flow rate will vary depending on several factors, such as water quality, high
TDS (500 ppm+), low temperatures (below 55°F), and low pressure (below 25 psi). These will
limit the performance of the system and reduce the filter's life.
Page 5

Product Features

Removes unpleasant chlorine, taste, odors, cloudiness and coloring.
Removes dirt, sand, silt, rust, and scale particles and absorbs THMS
and pesticides.
Removes lead (removes up to 98% of lead), chlorine, fluoride,
arsenic, hormones, asbestos, calcium, sodium, and more using a
0.0001 (one ten-thousandth) micron membrane.
Further enhances the sense and taste of the water.
Adding back essential minerals, while enhancing the water taste.
Filter
www.123filter.com
Purpose
Specification
15 - 70 psi
41–100°F
Up to 0.4 gal/min.
Input: 100-240V AC
Output: 24 DC
Recommended replacement cycle
| (678) 261-7611 |
6 months
24 months
12 months
support@123filter.com