Assembly Instructions - Boss Industrial ED8T20 Owner's Manual

UNPACKING & ASSEMBLY
UNPACKING
This product has been shipped
•
Carefully remove the log splitter and all accessories from the box. Make sure that all items listed in the
packing list are included.
•
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
•
Do not discard packing materials until you have carefully inspected and satisfactorily operated the tool.
•
If any parts are damaged or missing, please call 1-800-780-2677 for assistance.
•
Screw the control handle lever into handle bracket, and attach safety shield before operation (see FIGURE
3).
WARNING:
If any parts are damaged or missing, do not operate this tool until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or
modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and
possible serious personal injury.
Page | 11
pre-assembled.
(FIGURE 3).