Responsibilities; Receiving Inspection; Owner And/Or Operator Responsibilities; Specifications - MAHLE ATJ-1000H Operation Manual

Hi-rise transmission jack
Table of Contents

Advertisement

en | 6 | ATJ-1000H

4. Responsibilities

4.1 Receiving inspection

Before attempting to operate this equipment, thoroughly
read and understand this manual. Completely remove all
tape and packaging. Inspect the equipment immediately
upon delivery. If shipping damage is evident, inform the
delivering
carrier
immediately
manufacturer using the contact information on the back
cover of this manual.
4.2

Owner and/or operator responsibilities

The owner of this equipment must read these instructions
and maintain them for future reference and for instructing
any other users of the equipment. The owner is
responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and
literature are available from the manufacturer. The owner
must never authorize or allow anyone to use this
equipment until the operator has read and understood the
information in this manual and on the accompanying
labeling on the equipment itself.
If this equipment is being used in an occupational setting
(or workplace), the employer should ensure that all
personnel working with and around the equipment know
of the risks associated with its use. Personnel involved in
the use and operation of this equipment shall be careful,
competent, trained, and qualified in the safe operation of
the equipment and its proper use when servicing motor
vehicles and their components. Safety information
provided with this equipment should be emphasized by
the employer and understood by each employee. The
employer must make this manual available to all personnel
using this equipment and all personnel must read and
understand the contents of this manual. If the operator is
not fluent in English, the manufacturer's instructions and
warnings shall be read to and discussed with the operator
in the operator's native language by the employer, making
sure that the operator comprehends its contents and
observes the proper procedures for use of this equipment.
and
contact
the

5. Specifications

5.1 ATJ-1000H

Model ATJ-1000H
Capacity
Start Height
Lift Height
Width
Length
4 Swivel Casters
Air pressure
Weight
Tilt Forward
Tilt Rear
Tilt Side
Responsibilities
US units
Metric units
1,000 lb each
453.6 kg each
34.5 in
87.6 cm
72 in
182.9 cm
41 in
104.1 cm
41 in
104.1 cm
4 in
10.2 cm
90-160 psi
6.2-11.0 bar
125 lb
56.8 kg
50°
50°
20°
20°
10°
10°

Advertisement

Table of Contents
loading

Table of Contents