Table of Contents
Advertisement
en | 6 | CLS-10/CLS-15
4. Responsibilities
4.1 Receiving inspection
Before attempting to operate this equipment, thoroughly
read and understand this manual. Completely remove all
tape and packaging. Inspect the equipment immediately
upon delivery. If shipping damage is evident, inform the
delivering
carrier
immediately
manufacturer using the contact information on the back
cover of this manual.
4.2
Owner and/or operator responsibilities
The owner of this equipment must read these
instructions and maintain them for future reference and
for instructing any other users of the equipment. The
owner is responsible for keeping all warning labels and
instruction manuals legible and intact. Replacement
labels and literature are available from the manufacturer.
The owner must never authorize or allow anyone to use
this equipment until the operator has read and
understood the information in this manual and on the
accompanying labeling on the equipment itself.
If this equipment is being used in an occupational setting
(or workplace), the employer should ensure that all
personnel working with and around the equipment know
of the risks associated with its use. Personnel involved in
the use and operation of this equipment shall be careful,
competent, trained, and qualified in the safe operation of
the equipment and its proper use when servicing motor
vehicles and their components. Safety information
provided with this equipment should be emphasized by
the employer and understood by each employee. The
employer must make this manual available to all
personnel using this equipment and all personnel must
read and understand the contents of this manual. If the
operator is not fluent in English, the manufacturer's
instructions and warnings shall be read to and discussed
with the operator in the operator's native language by
the
employer,
making
comprehends its contents and observes the proper
procedures for use of this equipment.
and
contact
sure
that
the
operator
5. Specifications
5.1 CLS-10
Model CLS-10
Capacity (at 150 psi)
Capacity (at 200 psi)
the
Maximum Lift Height
Maximum Lift Height with
Optional Extension Adapter
Minimum Starting Height
Pin Increment Positions
Stroke
Width
Length
Weight
5.2 CLS-15
Model CLS-15
Capacity (at 150 psi)
Capacity (at 200 psi)
Maximum Lift Height
Maximum Lift Height with
Optional Extension Adapter
Minimum Starting Height
Pin Increment Positions
Stroke
Width
Length
Weight
Responsibilities
US units
Metric units
15,000 lb each
6,804 kg each
20,000 lb each
9,072 kg each
37.38 in
94.9 cm
52.38 in
133.0 cm
17.88 in
45.4 cm
2.50 in
6.4 cm
10 in
25.4 cm
15 in
38.1 cm
22 in
55.9 cm
139 lb
63 kg
US units
Metric units
20,000 lb each
9,072 kg each
30,000 lb each
13,608 kg each
38.25 in
97.2 cm
53.38 in
135.6 cm
18.75 in
47.6 cm
2.50 in
6.4 cm
10 in
25.4 cm
16.25 in
41.2 cm
23.75 in
60.3 cm
194 lb
88 kg
Advertisement
Table of Contents
