Samsung 2032BW Training Manual page 66

Hide thumbs Also See for 2032BW:

6. Service M ode (Hot plug M enu)

- . HDCP Hotplug : used when HDCP Video contents are not displayed. In case that

monitor is connected to some bad device which does not comply with standard.

- . HotPlug Time : If Hotplug is turn on, when monitor power off/on or changing to

the DVI, hotplug pin goes to the low. This function controls this time duration.

Though Hotplug is turn on monitor can't displayed, adjust this time duration

- . Default is 9(means 0.9 sec), can control 5 to 50.

2032gw 2232bw 2232gw