Samsung 2032BW Training Manual page 62

6. Service M ode / Safe M ode

Entering Service Mode
 Set both the brightness and the contrast to 0.
 Hold down the Enter button for five (5) seconds.
 The SVC Function OSD will appear.
 To exit the SVC Function OSD, you have to turn off the power.

Safe Mode
 If the frequency of the input signals is higher than the supported frequency, Safe mode gives a
user a period of time (one (1) minute) to change the video card settings to a Recommended mode.
For 17" monitors: Safe mode supports
for one (1) minute. However, it
than 85 Hz, which is a scheme to protect the panel from damage.
UXGA at 60Hz or 75Hz
switches to Sync Out of Range
and displays a down-scaled screen
immediately at a frequency higher