The Device - SACKit Touch 350 User Manual

THE DEVICE

How to pair SACKit Touch 350 and your device
1 . For first use: Long press the X Button for 10 seconds. After the first 5 seconds, you will hear the
ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by
flashing the power indicator red and blue
2 . Switch on Bluetooth on your device
3 . Choose "SACKit Touch 350" under Bluetooth settings on your device. Your headphones are now
connected with your device
4 . Start playing music on your device
5 . Long press the X button to turn off your SACKit Touch 350 headphones
6 . SACKit Touch 350 will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won't appear on the new device.
Operation instructions for use after first pairing
1 . After first time pairing your SACKit Touch 350 headphones and
2 . Bluetooth device will automatically reconnect, the LED light will blink blue once SACKit Touch
350 is successfully paired .
3 . Turn the headphones on by holding down the X button until you hear the ON sound
4 . Long press X button to turn off SACKit Touch 350 .
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Bluetooth Multipoint
SACKit Touch 350 comes with the Bluetooth Multipoint feature . This means that up to two devices
can be connected to the headphones at the same time . This enables you to for example connect the
headphones to a computer and a smartphone at the same time . To switch between the two devices,
just pause the music/sound on one device and press play on the other . If your phone rings, the
SACKit Touch 350 will automatically jump on the phone .
To connect a second Bluetooth device after a first one is already connected:
1 . Turn off the SACKit Touch 350,
2 . Then long press the X Button for 10 seconds. After the first 5 seconds, you will hear the ON
sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by flas-
hing the power indicator red and blue
3 . Switch on Bluetooth on your new device
4 . Choose "SACKit Touch 350" under Bluetooth settings on your device. Your headphones are now
connected with your new device
Operation instructions for in-line use
Use the 3 .5mm audio cable when you do not wish to use Bluetooth connection or when the battery
needs recharging . In-line use is possible when the battery is empty .
For in-line use:
• Connect the 3 .5mm plug into your SACKit Touch 350 Headphone 3 .5mm jack, then connect the
other 3 .5mm plug to your device 3 .5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music
6