Table of Contents
Advertisement
English
Hold the mowing head steady.
N
Rotate the spool counterclockwise
N
until the shortest line is about 10 cm
(4 in).
If necessary, cut the longer line to a
N
length of about 10 cm (4 in).
The mowing head is now full.
22
STIHL AutoCut 5-2
Removing remaining nylon line
1
2
Open the mowing head – hold it
N
steady with one hand and turn the
cap (1) counterclockwise.
Disengage the spool (2), take it out
N
of the mowing head and remove the
remaining line.
Winding line onto spool
A prewound spool (special accessory)
may be used as an alternative to the
following procedure.
3
4
3
Use green-coded nylon line with a
N
diameter of 2.0 mm (0.08 in).
Cut two 3 m (9ft 9in) lengths of
N
nylon line from the reel (special
accessory).
Insert the ends of each line (3) in the
N
holes (4) in the spool.
Bend the ends of the lines over the
N
edge of the holes to form a hook.
FS 40, FS 40 C, FS 50, FS 50 C
Hide quick links:
Advertisement
Table of Contents
