PRO-PULSE CMS174 Operator's Manual page 15

TABLE OF CONTENTS
SCHEMATIC DRAWING
PARTS LIST
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS FOR COMPOUND MITRE SAW
SPECIFICATIONS
FUNCTIONAL DESCRIPTION
ASSEMBLY
OPERATION
MAINTENANCE
WARRANTY
WARNING! Read and understand all instructions. Failure to follow all instructions
!
listed below may result in serious personal injury.
WARNING! When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock, and
!
personal injury. Completely read the manual before proceeding to use this tool.
KEEP THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
WORK AREA
1. Keep yourwork area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
ELECTRICAL SAFETY
4. Grounded tools must be plugged into an outlet that is properly installed
and grounded. Grounding provides a low-resistance path to carry electricity
to ground away from the operator, should the tool malfunction electrically.
Do not remove the grounding prong from the plug nor alter the plug in any way.
If in doubt as to whether the outlet is properly grounded according to code, check
with a qualified electrician.
5. Avoid body contact with grounded surfaces such as pipes, heaters, ranges
and refrigerators. The risk of electric shock is increased if your body is grounded.
6. Don't expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
7. Handle the cord carefully.Never use the cord to carry the tools or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of electric
shock.
8. When operating a power tool outside, use outdoor extensions cord marked
"W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric
shock.
PERSONAL SAFETY
9. Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating power tools may
result in serious personal injury.
10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing,and gloves away from moving parts. Loose clothes, jewelry,
or long hair can be caught in moving parts.
p.13
p.14
p.15
p.16
p.17
p.18
p.18
p .19
p.20
p.24
15