TP-Link AP300 V1 How To Upgrade

How to upgrade TP-LINK Wireless Access Point
Notice:

Please verify the hardware version of your device for the firmware ver
sion.Wrong firmware upgrading may damage your device and void the
warranty.

After you downloaded the firmware from TP-LINK website,
decompression software such as WinZIP or WinRAR to extract the
firmware file to a folder;

It's recommended to upgrade the firmware via
connection

Do NOT turn off the power or cut down the Ethernet cable during
upgrade process;

Because after upgrading the old settings may be lost, so please write
down the key settings
Step 1 Log into the TP-LINK device by typing
of the web browser (such as Internet Explorer, Firefox).
password are both admin
but not wireless connection;
as a backup before you start to upgrade.
unless you have changed it before.
Ethernet cable
http://192.168.0.254/
please use
in the address bar
The username and