Installation - Gradient Revolution MK IV User Manual

INSTALLATION

Carefully remove the loudspeakers from their packaging
boxes on the floor, on a soft surface such as a carpet.
· connecting the loudspeaker leads
Connections are on the base of the speaker. Connect the
speaker cables before assembling the top part. Turn the
speaker body gently to the floor ("Woofers are on this
side" marking against the floor). Connect the positive
lead to the red binding post of the speaker and the
negative (ground) lead to the black binding post.
· attaching the feet of the loudspeaker base
The base of the speaker is equipped with adjustable feet.
Attach the feet (3pcs / speaker) to the base of the
speaker. Tighten the feet with nuts using a 1 0mm wrench.
If necessary, the adjustable feet can be replaced by M6
spikes. The bottom part can then be turned upright.
· attaching the spike for the top part of the speaker
Fix the spikes to the top plate of the bottom unit and
adjust the height (35 mm or 1 3/8'') such that there will
be a gap of 1 -2mm between the bottom and top part of
the speaker. (The three black rubber pads of the top part
will be laying on the spikes.) Lock the spikes with the nuts.
The top part needs no tilting.
4