Installation - Gradient 1.4 Owner's Manual

INSTALLATION

Carefully remove the loudspeakers from their packaging
boxes on the floor, on a soft surface such as a carpet.
· attaching the feet of the loudspeaker base
Attach the special rubber feet (3pcs / speaker) to the base of
the bottom part of the speaker. If necessary, the standard
feet can be replaced by M8 spikes.
· connecting the loudspeaker cable
For fast, easy and high quality connecting, Gradient 1.4 is
equipped with a professional four-pole speakON connector
and cable housing. If you are not using dedicated Gradient
cables, a speakON cable connector has to be connected to
your cables. In that case follow instructions attached to the
packing to prepare cables. The speaker connector is located
on the base of the bottom part of the speaker, from where
the speaker cable can be routed freely in the desired
direction. Connect the speaker cable to the to the speaker
before assembling the top part.
The speakON connector comes with a twist and lock feature.
Press the cable connector into the connector on the bottom
of the speaker and twist. The connector locks and establish a
secure connection.
4