Installation - Gradient R-5A User Manual

INSTALLATION

Carefully remove the loudspeakers from their packaging boxes
on the floor, on a soft surface such as a carpet. First, connect
the Gradient XO-AMP unit to the other audio equipment
according to separate instructions coming with the XO-AMP
unit.
· attaching the feet
Attach the special rubber feet (3pcs / speaker) to the base of
the bottom part of the speaker.
· connecting the loudspeaker cable
For fast, easy and high quality connecting, Gradient R-5A is
equipped with a professional four-pole speakON connector
and cable housing. If you are not using dedicated Gradient
cables, a speakON cable connector has to be connected to
your cables. In that case follow instructions attached to the
packing to prepare cables.
The speaker connector is located on the base of the bottom
part of the speaker, from where the speaker cable can be
routed freely in the desired direction. Connect the speaker
cable to the to the speaker before assembling the top part.
The speakON connector comes with a twist and lock feature.
Press the cable connector into the connector on the bottom of
the speaker and twist. The connector locks and establish a
secure connection.
4