Motorola MINITOR IV Programming Manual page 17

Minitor IV
6880309M81-A
Group Field Name
Model Stored Voice
Option Function
Fixed Alert
Priority Scan F1
Alert Duration
Call Reminder
Priority Alert
Privacy
Reset Function
(Automatic,
Delayed N, Revert,
Manual, Timeout,
Revert N)
Squelch level
(1 ~ 10)
Note: Not all features are available on all models
9/20/2004
Pager Programming Guide
Description
Enable or disable stored voice models with this
option
Select either ON or OFF. If ON is selected, the
pager operates in the "fixed alert" mode. This
means the tone alert is at maximum volume
regardless of the position of the volume control.
If OFF is selected, then the alert tone and voice
audio level is adjustable using the volume
control.
Select either ON or OFF. If the pager model is
configured for scan option, then this field
provides the ability to turn the PRIORITY
feature ON or OFF. In the ON mode, the pager
performs a priority scan function. In the OFF
mode, the pager performs a normal scan with
the priority feature omitted.
Select either standard (STD) or alert cycle
duration variable (FIXED) in seconds.
STD = Alert cycle controlled by the transmitted
tone duration.
FIXED = a fixed time entered by the user.
Note: A message may be missed if the alert
duration is too long.
When stored voice is present, this enables the
pager to beep periodically indicating an unread
message.
Select either ON or OFF. When ON Vibra-Page
alerts are replaced by tone alert for call1 only.
Select either ON or OFF. When set to ON,
prevent the reset button from being used to
monitor the channel.
Determines how a select call pager squelches a
message after receiving a page.
Select squelch level
Table 5 Model Option Page
Getting Started
13