Table of Contents
Advertisement
Pollution Degree ....................................................2
MTBF.....................................................................544,562 h at 25 °C
Functional shock (PXI only)..................................MIL-T-28800 E Class 3 (per Section 4.5.5.4.1)
Operational random vibration
(PXI only) ..............................................................5 to 500 Hz, 0.31 grms, 3 axes
Nonoperational random vibration
(PXI only) ..............................................................5 to 500 Hz, 2.5 grms, 3 axes
Note
Random vibration profiles were developed in accordance with MIL-T-28800E and
MIL-STD-810E Method 514. Test levels exceed those recommended in MIL-STD-810E
for Category 1 (Basic Transportation, Figures 514.4-1 through 514.4-3).
Approved at altitudes up to 2,000 m.
Safety
This product is designed to meet the requirements of the following standards of safety for electrical
equipment for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or visit
certification
in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards of EMC for electrical
equipment for measurement, control, and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note
For EMC compliance, operate this device according to product documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for
CE marking, as follows:
•
73/23/EEC; Low-Voltage Directive (safety)
•
89/336/EEC; Electromagnetic Compatibility Directive (EMC)
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory
compliance information. To obtain the DoC for this product, visit
search by model number or product line, and click the appropriate link in the Certification column.
© National Instruments Corporation
, search by model number or product line, and click the appropriate link
Half-sine shock pulse, 11 ms duration, 30 g peak,
30 shocks per face
ni.com/certification
7
ni.com/
Getting Started with the NI PXI/PCI-1422
,
Advertisement
Table of Contents
