Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rompa Manuals
  4. Baby Swing
  5. 21011
  6. Quick start manual

Rompa 21011 Quick Start Manual

Multi-child swing
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
1. Product Name
Multi-Child Swing
2. Product Code
21011
3. Colour
Colours may vary.
4. Brief Description
Provides vestibular stimulation
5. Contents
 2 x short impact protector (head piece) A
 2 x short aluminium tube B
 2 x long impact protector (side piece) C
 2 x long aluminium tube D
 1 x large plastic pouch with lying surface netting:
25 short straps in blue, violet or red E1
11 long straps in white or silver E2
 4 x ropes F

Advertisement

loading
Need help?

Need help?

Do you have a question about the 21011 and is the answer not in the manual?

Questions and answers

Related Manuals for Rompa 21011

Summary of Contents for Rompa 21011

  • Page 1 1. Product Name Multi-Child Swing 2. Product Code 21011 3. Colour Colours may vary. 4. Brief Description Provides vestibular stimulation 5. Contents  2 x short impact protector (head piece) A  2 x short aluminium tube B  2 x long impact protector (side piece) C ...
  • Page 2 21570 Safety Snap 21590 Locking Safety Snap 21548, 21607, 21546 Height Adjustment System 21559 Safety Rotational Device ROMPA® offer a range of Sensory Integration suspension products such as swings, gliders, nets, bolsters etc. Please visit www.rompa.com for details about our full range.
  • Page 3 9. Starting Up  Assemble the swing and attach the ropes.  Hang the swing from an appropriate frame/suspension system and adjust the ropes. 10. Detailed Description With plenty of room to share – up to 4 children or 2 adults and 2 children. For indoor and outdoor use.
  • Page 4 13. Installation...
  • Page 5 Installation continued Assemble the swing and attach the ropes as shown above. Firstly, lay out all the parts as shown below: Thread the long straps onto one of the short tubes B. Open the short impact protector a little. Working carefully from one end mount the short tube into the short impact protector.
  • Page 6 Weave the straps together to create the webbing. Weave the long straps through the short ones alternatively – up-down-up-down; then down-up-down-up for the neighbouring strap. Use all the straps supplied. Make sure the straps are not twisted. Make sure the webbing is even. Thread the long straps into the second short tube.
  • Page 7 If you are suspending the swing from a ceiling, make sure the ceiling is stable, level and use appropriate suspension points such as ROMPA®’s Hanging Brackets (see Compatible ROMPA® Products above). If suspended from a beam, this should be at least 12 x 12cm. Use bolts at least M10 x 14cm.
  • Page 8 Replacement parts are available should they become worn or damaged. Please contact ROMPA®.  Check that all screw and nut connections are tight. If a lock nut of the ropes is damaged, a whole new set of ropes will be required.

  • Page 9: 15. Troubleshooting

    15. Troubleshooting Not applicable Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com...