Subscribe to Our Youtube Channel
Related Manuals for Rompa Ultimate T Swing
Summary of Contents for Rompa Ultimate T Swing
- Page 1 1. Product Name Ultimate T Swing 2. Product Code 21579 3. Colour Likely to be as shown 4. Brief Description Three swings in one! This versatile and unique vinyl swing can be used 3 ways: upside down, flat and right side up.
- Page 2 Please note that a suspension system etc. is not included but are available from ROMPA®. ROMPA® offer a range of Sensory Integration suspension products such as swings, gliders, nets, bolsters etc. Please visit www.rompa.com for details about our full range.
-
Page 3: Detailed Description
9. Starting Up There are no short-cuts to setting up Sensory Integration products. Read all instructions thoroughly before installing and using the Ultimate T Swing and keep the instructions in a safe place. 10. Detailed Description Three swings in one! This versatile and unique vinyl swing can be used 3 ways: upside down, flat and right side up. - Page 4 11. Safety Always supervise the use of this product. This product is not a toy. Any activity involving motion, height, or rotation may cause serious injury. This product is intended for use under the supervision of trained professionals. Do not exceed the 180kg (400lbs) working load. ...
-
Page 5: Technical Specification
200kg load at up to a 45° angle in any direction. Please check equipment immediately for any damage that may have resulted during shipping. If any damage has occurred, please contact ROMPA® immediately. To open the Safety Snap, turn the locking nut clockwise as far as possible. - Page 6 The Height Adjustment Systems are supplied fully assembled and ready to suspend. An additional Safety Snap is not included but will be required to secure each Height Adjustment System used to the final point of suspension. We recommend that you adjust the Vertical Ascension Device before hanging your equipment from it.
- Page 7 Pull down on the Locking Carabiner to verify the security of the rope position. The rope position needs to be fully locked (immoveable) in order to use the system and attach equipment safely. Attach the Safety Snaps on each end of the Height Adjustment System and attach to the eyebolt loop(s) on the swing according to how you wish to use it: right side up...
- Page 8 flat upside down Once the Height Adjustment System is secured to an appropriate final point of suspension and the chosen height of the rope has been secured, any equipment needs to hang from the Locking Carabiner attached to the Vertical Ascension Device. Putting weight on the Locking Carabiner is what activates the ‘teeth’...
- Page 9 A Safety Rotational Device must be used for all activities, not just for rotation, as this helps prevent wear on the suspension point (not included but available from ROMPA®). All suspended equipment requires a minimum ceiling height of 2.5 metres/8 feet.
-
Page 10: Care And Maintenance
15. Troubleshooting Not applicable Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com... - Page 11 SENSORY INTEGRATION MAINTENANCE CHECK LIST PRODUCT: ………………………………………………. TO CHECK Date / S (Satisfactory) or R (Repair/replace)
Need help?
Do you have a question about the Ultimate T Swing and is the answer not in the manual?
Questions and answers