Programs - Samsung TC222T User Manual

2
Using "Windows 10 Enterprise LTSB"

2.3.3 Programs

Remote Desktop Connection
You can control a running terminal server or another computer (Windows 95 or later) remotely through a
remote desktop connection.
Remote Desktop

Windows 7 Professional or Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 must

be installed on the computer to be controlled remotely. This computer is called a host.
A remote computer running on an operating system later than Windows 95 is required. This

remote computer is called a client. The client software for the remote desktop connection must be
installed on the client.
You must also be connected to the Internet. A broadband Internet connection is good for high

performance. However, because the remote desktop transmits a minimum set of data including
the display data and keyboard data to control the host remotely, a broadband Internet
connection is not required. You can run a remote desktop on a low bandwidth Internet
connection.
When running a remote desktop on Windows 7 Professional, you cannot use the operating
system of your computer.
Enabling Your Computer as the Host

You must enable the Remote Desktop feature to control it from another computer. You must be
logged on as an Administrator or a member of the Administrators group to enable Remote
Desktop on your computer. Follow these steps:
1
Open the System folder in the Control Panel.
2
Go to [Start
settings.
3
If you want to block other PCs from accessing your PC using Remote Desktop or
RemoteApp, select "Don't allow remote connections to this computer."
To allow a remote PC to access your PC using any version of Remote Desktop or RemoteApp,

select "Allow remote connections to this computer"
To allow a remote PC to access your PC using a Remote Desktop or RemoteApp version

requiring a network level authentication, select "Allow connections only from computers
Control Panel System and Security System], and click Remote
2 Using "Windows 10 Enterprise LTSB"
34