General; How To Use This Manual; Service And Support - Bredel PUMP Series Original Instructions Manual

GENERAL

1 GENERAL
1.1

How to use this Manual

This manual is intended as a reference book for
qualified users, enabling them to install, commission
and maintain the bare shaft set as mentioned on the
front cover. This manual is an addition to the pumphead
manual, drive manual and gearbox manual. This
manual does not replace any of these documents. The
user should carefully read these documents before
using this manual.
Documentation of components such as pumps, motors
and inverters is normally not included in this manual.
However, if additional documentation is supplied, you
must follow the
documentation.
1.2

Service and Support

For information with respect to specific adjustments,
installation, maintenance or repair jobs which fall
beyond the scope of this manual, contact your Bredel
representative. Make sure you have the following data
at hand:
•
Type and / or serial number of the hose pump.
•
Description of the drive or gearbox.
You will find these data on the identification plates or
stickers of the pumphead and the drive or gearbox.
2
instructions in this additional