Childproof Lock; Adding/Removing Laundry; Changing The Programme; Cancel The Programme - Siemens WN34A1L0DN Instruction Manual And Installation Instructions

Childproof lock

You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the ( (varioSpeed) and B
(Finished in / Time Dry) buttons for 3
seconds. The symbol w lights up in
the display panel.
w lights up: The childproof lock is
■
activated.
w flashes: If the programme and
■
programme settings are adjusted
while childproof lock is activated.
When the programme ends, "Ÿš
Note:
is displayed. The door is unlocked. w
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the ( (varioSpeed)
and B (Finished in / Time Dry) buttons
until the symbol w disappears.

Adding/removing laundry

After starting the programme (only for
washing), you can add or remove
laundry if necessary.
Touch the I (Start/Reload) button.
The appliance checks whether
reloading is possible.
If the following appears on the display
panel:
The symbol Õ disappears,
■
reloading is possible.
The symbol Õ lights up, reloading is
■
not possible.
To continue the programme, touch the
I (Start/Reload) button. The
programme continues automatically.
Operating the appliance
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:
Touch the I (Start/Reload)
1.
button.
Select another programme.
2.
And touch the I (Start/Reload)
3.
button again. The new programme
starts from the beginning.
If drying is activated, you can
Note:
change the programme by programme
selector directly.

Cancel the programme

For programmes washing at high
temperatures:
Touch the I (Start/Reload)
1.
button.
To cool down laundry: Select Rinse.
2.
Touch the I (Start/Reload)
3.
button.
For programmes washing at low
temperatures:
Touch the I (Start/Reload)
1.
button.
Select Spin/Drain.
2.
Touch the I (Start/Reload)
3.
button.
For programmes in drying process:
Turn the programme selector to any
1.
other programme.
Wait a few minutes to cool down
2.
laundry, then the door will be
unlocked.
en
39