ZeeVee ZyPerPad User Manual page 11

ZyPerPad User Guide
Click on any of the Edit buttons to create a command that will later be assigned
to a button.
Assign a short description of the command to Command Name. (Note: Limited
to 24 characters)
Set HEX String Enable to String.
Enter the desired API command in the Command line. Note command must be
typed exactly as needed by the ZMP API. Note that encoder/decoder names
are case sensitive.
End Flag should be set to \r\n.
The example above with the name "Join None" is for the API command "join
none UHDdec2 fastSwitched"
Rev 20211006 Page 11 of 26