Sony VAIO VGX-XL1 User Manual page 82

5 Click Add
displays.
Adjust the following access point settings to be used:
• Enter Network name (SSID). You can enter a maximum of 32 characters
(case-sensitive) for the Network name (SSID).
• Set
• If WPA-PSK
Key is Provided Automatically
6 Click OK. If you successfully connect to the new wireless LAN access point, a
message displays in the communication area saying you are connected.
To set the priority of the wireless LAN access points that are available
for connection
Note: If you move outside of the range for connecting to a wireless LAN
access point, it automatically switches to the next registered access point in
order of priority, choosing from available access points.
1 Click Start
2 From the Control Panel, click the
VGX-XL1 Digital Living System
in the Preferred Networks. The Wireless Network Properties screen
Network Authentication
and WEP
from the Windows task bar, and then click
and Data Encryption.
are selected, remove the check mark by clicking
and, if necessary, enter the
Network Connections
Network
Control Panel.
icon.
key.
79