Sony VAIO VGX-XL1 User Manual page 65

Align clips on both sides
of memory module.
7 Install the graphics card. Install the graphics card, connect the cable and
tighten the screw.
8 Install the upper cover. Install the cover and tighten the screws on the back.
9 Connect the power cord and the peripheral devices that were removed in Step
1 and turn on the power to this device.
10 Click the
Information
62
Start button and then point to
and then click VAIO
Clips on both sides must
fit into the notches on
the memory module.
All Programs, VAIO
®
System Information.
®
System
VGX-XL1 Digital Living System