Sony VAIO VGX-XL1 User Manual page 122

If required, your computer restarts and displays the screen Restore C: Drive
(Step 2 of 4). A time bar displays showing the progress of the first part of the
C: drive recovery.
Note - If you started your computer from the recovery discs, a message may
display requesting that you insert additional recovery discs. When complete,
you are asked to remove the disc and insert disc 1.
SAME
message displays asking you to remove the disc. Click
The computer restarts and displays the Restore C: Drive (Step 3 of 4) screen.
This screen displays the progress of the last part of restoring the C: Drive to
its original factory configuration, and the individual install screens of each
software program as it is installed.
5 When the restore completes, the screen Restore C: Drive
(Step 4 of 4) appears. Check for active program installation windows. Follow
the on-screen instructions to complete the installation for that specific
program. Continue until all active program windows are gone.
6 Click Finish to exit VAIO Recovery and restart your computer. When your
computer restarts, you are guided through a series of screens for Windows
set up. Follow the on-screen instructions.
This completes the VAIO Recovery option of Restore C: Drive.
Restore Complete System
The Restore Complete System option restores the entire main hard drive to
its original factory configuration. The time to complete the restore can vary
depending on the amount of software being restored and the speed of your
computer.
WARNING - Restore Complete System deletes all personal files and settings,
and any software installed after the purchase of the computer.
• This option is primarily for the following reasons:
• The main hard disk is replaced
• Change or modification of a RAID array configuration
• Restore the recovery drive partition on the main hard disk
VGX-XL1 Digital Living System
DISC. Click OK. The program continues and prepares to restart. A
THIS COULD BE THE
OK to continue.
119