Advertisement
When the password channel is used, the user needs to transfer the password to view and set the XY fine
adjustment and lamp white balance parameters.
The number of
characters in the
"DOWN DOWN UP UP".
• PAN_INIT:
• TILT_INIT:
• SET_R:
• SET_G:
• SET_B:
• SET_W:
8、Reset
After the user selects reset, wait for 3 seconds and the lamp will be reset.
Routine maintenance
Cleaning and maintenance
The equipment requires daily cleaning and maintenance. The service life of the equipment
depends largely on the operating environment and daily cleaning and maintenance. Please
disconnect the power before opening any cover.
The optical components should be lightly rubbed, the surface of the coating is very brittle, and it is
easy to scratch. Do not use destructive solvents or damage the plastic or coated surface. Use a soft
brush, tissue, air cleaner or pressure blower to remove dust from the fan and air vents.
4
4
password is four. Press "UP" or "DOWN" to enter. The factory password is
Advertisement
