Advertisement
This option is to set the parameters of the lamp body scene. Press "Enter" to enter the save and run online. The
operating mode (Run Mode) of the pre-conditioner should be set to manu
is off. The next time you turn it on, you can restore the previous power-on state.
• PAN
• PANMICO
• TILT
• TILTMICO
• XY_SPEED
• ZOOM
• DIM
• STROBE
• DIM_R0
• DIM_G0
• DIM_B0
• DIM_W0
• DIM_R1
• DIM_G1
• DIM_B1
• DIM_W1
• DIM_R2
• DIM_G2
• DIM_B2
• DIM_W2
• LIGHT_CH
• SHOW_SP
• MACRO_CH
6、Sound to Light Mode
This option is to switch the sound sensitivity of the lamp body. Press "Enter" to enter the setting. Press "UP" or
"DOWN" to select the sensitivity of 0~100 level. After selecting the sensitivity, press " Enter" save and exit.
7、System Set
PAN Reset:
TILT Reset:
Code Settings:
3
Normal
/ Inverted
Normal
/ Inverted
3
l, which is valid only after the power
a
Advertisement
