Advertisement
This option is used to set the DMX communication address and channel mode. Press "Enter" to enter the setting.
Press "UP" to increase the address number. Otherwise, "DOWN" to decrease the address number. After
selecting the address, select the address. Press "Enter" to save and exit. The channel has 24 channels and 16
channels mode selection.
2、Run Mode
This option is used to set the working mode of the lamp body. Press "Enter" to enter the setting. Press "UP" or
"DOWN" to select the working mode. The working mode has "DMX512", "Slow" and "Fast". "", "Sound" and
"manual", select the working mode and press "Enter" to save and exit.
DMX512: DMX mode
• Slow:
Auto mode slowly
• Fast:
Auto mode in fast
• Sound
• manual:
3、Invert PAN/TILT
This option is to reverse the direction of the X/Y axis. Press "Enter" to enter the setting. Press "UP" or "DOWN"
to reverse the selection of the X/Y axis. Select "Yes" to indicate X. /Y axis is reversed. Select "NO" to indicate that
the X/Y axis is not reversed. After selecting the direction, press "Enter" to save and exit.
4、Display Set
This option is to set the LCD font backwards, Chinese and English display and backlight of the display panel. Press
"Enter" to enter the setting. Press the "UP" or "DOWN" button on the LCD backlight to select the switch. Select
"Yes". " indicates that the LCD backlight is always on and off, and "NO" means that no button operation is turned
off after 20 seconds, and then turned back on when there is a button operation. After selecting the settings,
press "Enter" to save and exit.
• Invert Word
• English/Chinese:
• LCD Backlight on
4、Manual Set
2
sound control mode
manual operate
2
Advertisement
