This option is used to set the DMX communication address and channel mode. Press “Enter” to enter the setting. Press “UP” to increase the address number. Otherwise, “DOWN” to decrease the address number. After selecting the address, select the address. Press “Enter” to save and exit. The channel has 24 channels and 16 channels mode selection.
This option is to set the parameters of the lamp body scene. Press “Enter” to enter the save and run online. The operating mode (Run Mode) of the pre-conditioner should be set to manu l, which is valid only after the power is off.
When the password channel is used, the user needs to transfer the password to view and set the XY fine adjustment and lamp white balance parameters. The number of password is four. Press “UP” or “DOWN” to enter. The factory password is characters in the “DOWN DOWN UP UP”.
DMX Table 24CH FUNCTION DMX Value description 0-255 0~540 degree 0-255 16bit fine 0-255 0~270 degree 0-255 16bit fine XY speed 0-255 0-100% Zoom 0-255 Dimmer 0-255 0 → 100% intensity Strobe No function 4-95 0-100%(1HZ~25HZ) 96-176 Random strobe 177-255 Fast strobe 0-255 Red 1 dimmer 0-100%...
Page 6
150-199 Auto 2 200-255 Sound control Reset 0-250 No function 251-255 Reset(wait for 3s) 16CH Function DMX Value Description 0-255 0~540 X Fine 0-255 16bit 0-255 0~270 degree Y Fine 0-255 16bit XY speed 0-255 From fast to slow Dimmer 0-255 0-100% Strobe...