Advertisement
Table of Contents
Installation Guide for WRM-series
Wall Mounting Systems
WRM-11
SAFETY INSTRUCTIONS
1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety
instructions. Improperly installed mounting equipment may result in property damage, personal injury and/or liability for
the installing contractor.
2. Always use safety cables! This will prevent equipment from falling during/after setup and while exploiting.
3. Always check if the wall surface is structurally strong enough to support load. Make sure the wall and/or ceiling structure
allows to hold the weight of the speaker including its bracket.
4. Only use appropriate fasteners.
5. Always make sure to securely use and tighten/lock all mounting bolts provided. Loose bolts may become unscrewed
over time due to vibration which could potentially create a safety hazard when not tightened securely.
www.mnmounting.com
info@mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Installation Guide
WRM - series
Models:
WRM-25
WRM-18
Advertisement
Table of Contents
Related Manuals for MN Mounting Solutions WRM-Series
Summary of Contents for MN Mounting Solutions WRM-Series
- Page 1 Installation Guide WRM - series Installation Guide for WRM-series Wall Mounting Systems Models: WRM-18 WRM-11 WRM-25 SAFETY INSTRUCTIONS 1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety instructions. Improperly installed mounting equipment may result in property damage, personal injury and/or liability for the installing contractor.
- Page 2 Installation Guide WRM - series Installation Instructions: 1. First, release the upper bolt which securing the speaker plate to the 2. Screw the speaker plate to the rear bracket arm. Now remove the speaker (4) holes of the loudspeaker by using all plate from the arm.
Need help?
Do you have a question about the WRM-Series and is the answer not in the manual?
Questions and answers