Connection/Settings 1; Connecting To A Wireless Network; Checking The Type Of Access Points; Setting With Aoss - Sony VGF-CP1 Operating Instructions Manual

Connecting to a Wireless Network

By connecting this unit to a wireless network or the Internet, you can play back photos or music stored on a
computer or in a Web photo organizer on the Internet.

Hint
The reception icon is displayed when the information bar is at the top of the screen. The reception icon shows the

strength of the network signal, many bars around the antenna show a stronger signal.
To connect to a wireless network, the WLAN ON-OFF switch must be set to ON. The factory default setting is ON.

Note
In order to set up your home wireless network connection, you need a wireless LAN router and a subscription to an
Internet service provider.

Checking the Type of Access Points

If the access point device (wireless LAN router) supports AOSS, see "Setting with AOSS. " Otherwise, see
"Setting Manually" (page 54).
About AOSS
AOSS™ (AirStation One-Touch Secure System) is a technology developed by Buffalo Technology. The
wireless LAN can be connected with an one-touch operation, and security is set automatically.

Setting with AOSS

If you use an access point that supports AOSS, set by the following steps.
1
Press HOME on the remote control.
2
Press  on the remote control, select [
(ENTER).
3
Select [ Network settings] by pressing  on the remote control, and press
(ENTER).
The Network settings screen appears.
4
Select [Select a connection] by pressing  on the remote control, and press
(ENTER).
Connection/Settings
Settings] by pressing  , and press
1