Changing The Various Settings; Setting Procedure - Sony S-Frame DPF-D70 Operating Instructions Manual

Changing the various
settings
Setting procedure
You can change display, slideshow, brightness,
language, and other settings of the photo frame.
It is also possible to reset the settings to their
factory defaults and format the intenal memory.
Only internal memory can be formatted.
1
Press MENU.
The menu is displayed.
2
Press
+1+
to select [Various
settings] and then press
0
to
display the Various settings screen.
3
Press
+1+
to select the item you
want to change and then press
O.
The setting screen of the selected item is
displayed.
For example, when [Slideshow Settings]
is selected.
26
GB
4
Press
+1+
to select the item you
want to change and then press
O.
This enables you to set each of the items
(page 27).
When the photo frame is, for instance,
displaying a slideshow, some items are
unavailable for changing the settings. They are
displayed in gray and cannol be selected.
5
Press
+1+
to select a setting value
and then press
O.
Each time you press
.1+
(.1+ from the
photo frame), the setting value changes. In
the case of a numerical value, press
+
to
increase the value and press. to decrease
the value.
If you press
0,
the setting is confirmed.
6
Press MENU.
The menu closes.
Tips
• To perform this operation from the photo frame,
press MENU, press the direction buttons to select
the item, and then press
-+-
ENTER.
• To reset the settings to their factory defaults, select
[Reset] and then press
O.
Adjusted values except
clock setting are reset to default settings.