Advanced Operations; Enjoying A Slideshow; Changing The Settings Of The Slideshow - Sony S-Frame DPF-VR100 Handbook

Advanced operations

Enjoying a slideshow

1
Press (SLIDE-SHOW).
Tip
When using the buttons on the photo frame,
press VIEW MODE on the upper back of the
LCD screen and press v/V to select Slideshow.
2
Press B/b to select the desired style
and press .
See "Slideshow display" (page 17) for
details on the slideshow styles.
GB
24
Changing the settings of the
slideshow
1
Press MENU.
2
Press B/b to select the [Slideshow
Settings] tab.
3
Press v/V to select the item you
want to change and press
See the tables on the next page for details
on the setting items.
Notes
• Note the following when you select a slideshow
using the image stored on a memory card.
– Due to the characteristics of memory card
devices, images may be subject to data error
when read too often.
– Do not run a slideshow for a long time with a
small number of images. This may cause data
error.
– We recommend you back up images on a
memory card often.
• When the photo frame is, for instance, displaying a
slideshow, changes to the settings of some items are
unavailable. These items are shown in gray and
cannot be selected.
• The slideshow will not start from the point where
you stopped if you turn off or reset the photo frame.
• When the screen is too bright, it may make you feel
nauseous. Be careful not to make the brightness
settings too bright when you use the photo frame.
.