Atlantic Raised Panel Trundle Assembly Instructions

Download this manual

READY

Before assembling your Raised Panel Trundle, please read through these

instructions carefully. Familiarizing yourself with the different parts.

please contact Atlantic Furniture at service@atlanticfurniture.com 1-800-955-3726 / M-F 9:00-5:00 EST

BED WITH RAISED PANEL TRUNDLE

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB OR BARREL NUT ARE DAMAGED DURING ASSEMBLY.

JCB M6 X 2 "( 50mm ) - 4 pcs

JCB M6 X 1 3/4"( 45mm ) - 17 pcs

JCB M6 X 5/8"( 15mm ) - 6 pcs

Fix L Bracket to Front Panel

RAISED PANEL TRUNDLE

ASSEMBLY INSTRUCTIONS

Thank you for choosing our new Raised Panel Trundle.

This practical design offers the utmost in versatility.

ATTENTION! If you receive a damaged or defective item,

HARDWARE

Spare - 1 pc

Spare - 2 pcs

Barrel Nut - 4 pcs

Spare - 1 pc

For JCB M6 X 2"(50mm )

L Bracket - 3 pcs

Allen wrench - 1 pc

Spare - 1 pc

Adult Assembly

Allen wrench

Page 1 of 4

Need help?

Do you have a question about the Raised Panel Trundle and is the answer not in the manual?

Page 1 Thank you for choosing our new Raised Panel Trundle. This practical design offers the utmost in versatility. Before assembling your Raised Panel Trundle, please read through these instructions carefully. Familiarizing yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at service@atlanticfurniture.com 1-800-955-3726 / M-F 9:00-5:00 EST...
Page 2 Barrel Nut Allen wrench BOTTOM VIEW Adult Assembly Attach the back boards (08) to the back rail (04), using JCB M6 X 2”(A), and barrel nut (D). Tighten with the Allen wrench (F). Page 2 of 4 RAISED PANEL TRUNDLE...
Page 3 STEP 3 JCB M6 X 5/8” Allen wrench Adult Assembly Attach the front panel (02) to assembled front rail as shown, using JCB M6 X 5/8” (C). Tighten with the Allen wrench (F). Page 3 of 4 RAISED PANEL TRUNDLE...
Page 4 Lay the slats (09) onto the bed, and fix in place. Using JCB M6 X 1 3/4”(B), tighten with the Allen wrench (F) Congratulations ! Your Raised Panel Trundle is now ready for use. We recommend that you periodically check that all screws are tight and all parts are secure to ensure lasting safety.