EnGenius FreeStyl SIP User Manual page 68

Press
(2)
Re: When Set "On," the handset match the Caller ID with the phone book
entries, once matched, the LCD screen will display the name or
nickname instead of pure Caller ID info (needs Caller ID service from
local telephone company).
f. Press 6
(1)
Use
French). Default is "English."
Press
(2)
g. Press 7
(1) Enter characters using the Character Table and method discussed in the
Phone book section.
(2) Use
the left of the cursor) or delete (the character above the cursor, or left
of the cursor if cursor is on the right of the last character).
(3) Press
Re: Once entering the custom name, the greeting of the LCD in standby
mode will be changed as entered.
Default greeting is "FreeStyl SIP"
h. Press 8
Enter original (4-digits) of handset then press
(1)
entering this menu.
Enter new password (4-digits) then press
(2)
new password.
i. Press 9
7. Press 6 to set Base Settings:
When entering this menu, you must enter Base PIN code first (4-digits).
Re: The PIN code is for Base Settings. Default is "0000 ."
a Press 1
Enter 2-digit handset ID then press
(1)
When registering a new handset, the base will assign the specific
(2)
handset ID, which is assigned in advance to the new handset.
b. Press 2
SAVE (Left) soft key to confirm selection.
to set Language:
or to scroll through option 1~3 (1. English, 2. Spanish, 3.
SAVE (Left) soft key to confirm selection.
to set Custom Name:
or to move the cursor backward or forward to insert (to
SAVE (Left) soft key to confirm setting.
to Change Password:
to set Headset Ring: See Headset Ring operation on Page 52.
to set Assign Next HS:
to set Clear HS:
SAVE
OK (Left) soft key.
~68~
OK (Left) soft key when
(Left) soft key to confirm