DIMM (Dual In-line Memory Module) Removal
Prerequisite:
Base Cover Removal
1. Find the DIMM (C). Refer to
2. Push DIMM clips (A) outwards (Figure 3-14).
Figure 3-14. DIMM Removal
3. Disconnect the DIMM from the mainboard connector (B). Refer to
DIMM Installation
1. Connect the DIMM to the mainboard connector (B). Refer to
2. Push down on the DIMM until the module clips (A) lock into position. Refer to
Figure
3-14.
3. Install the base cover.
3-18
Figure
3-9.
A
B
Figure
Figure
3-14.
Machine Maintenance Procedures
0
3-14.
0