DIMM (Dual In-line Memory Module) Removal
Prerequisite:
1. Find the DIMM (D). Refer to
2. Push DIMM clips (A) outwards
Figure 3-16. DIMM Removal
3. Disconnect the DIMM from the mainboard connector (B). Refer to
DIMM Installation
1. Connect the DIMM to the mainboard connector (B). Refer to
2. Push down on the DIMM until the module clips (A) lock into position. Refer to
Figure
3. Install the base cover.
Machine Maintenance Procedures
http://mycomp.su - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука. Схемы,сервис мануалы,инструкции по разборке ноутбука.
Base Cover Removal
A
3-16.
Figure
3-10.
(Figure
3-16).
B
A
Figure
3-16.
Figure
3-16.
3-19
0
0