3G Module Removal
Prerequisite:
Base Cover Removal
1. Find the 3G module (B). Refer to
2. Disconnect main (A) and auxiliary (B) antenna cables from module
D
Figure 3-14. 3G Module
3. Remove one (1) screw (C) from the mainboard. Refer to
4. Remove the 3G module from the mainboard connector (D). Refer to
3G Module Installation
1. Place the 3G module into the mainboard connector (D). Refer to
2. Install and secure one (1) screw (C) to mainboard. Refer to
3. Install the main (A) and auxiliary (B) antenna cables on 3G module. Refer to
Figure
3-14.
4. Install the base cover.
ID
Size
C
M2.0*3.0 NI
Machine Maintenance Procedures
Figure
3-10.
C
B
A
Quantity
1
(Figure
3-14).
Figure
3-14.
Figure
3-14.
Figure
3-14.
Figure
3-14.
Screw Type
0
0
3-17