WLAN (Wireless Local Area Network) Module Removal
Prerequisite:
Base Cover Removal
1. Find the WLAN module (C). Refer to
2. Disconnect main (A) and auxiliary (B) antenna cables from module
Figure 3-15. WLAN Module
3. Remove one (1) screw (C) from the mainboard. Refer to
4. Remove the WLAN module from the mainboard connector (D). Refer to
WLAN Module Installation
1. Place the WLAN module into the mainboard connector (D). Refer to
2. Install and secure one (1) screw (C) to mainboard. Refer to
3. Install the main (A) and auxiliary (B) antenna cables on WLAN module. Refer to
Figure
3-15.
4. Install the base cover.
ID
Size
C
M2.0*3.0 NI
3-18
Figure
D
B
Quantity
3-10.
C
A
Figure
Figure
1
Machine Maintenance Procedures
(Figure
3-15).
3-15.
Figure
3-15.
Figure
3-15.
3-15.
Screw Type
0
0