Download  Print this page

Acer Aspire One AOD250 Service Manual

Hide thumbs

Advertisement

Table of Contents

Aspire one Series

Service Guide
Service guide files and updates are available
on the ACER/CSD web; for more information,
please refer to
http://csd.acer.com.tw
PRINTED IN TAIWAN

Advertisement

Table of Contents
loading

  Also See for Acer Aspire One AOD250

  Summary of Contents for Acer Aspire One AOD250

  • Page 1: Aspire One Series

    Aspire one Series Service Guide Service guide files and updates are available on the ACER/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...
  • Page 2 Revision History Please refer to the table below for the updates made to this service guide. Date Chapter Updates...
  • Page 3 Copyright Copyright © 2009 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated.
  • Page 4 Conventions The following conventions are used in this manual: SCREEN MESSAGES NOTE WARNING CAUTION IMPORTANT Denotes actual messages that appear on screen. Gives bits and pieces of additional information related to the current topic. Alerts you to any damage that might result from doing or not doing specific actions.
  • Page 5 DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.
  • Page 7: Table Of Contents

    Your Acer Notebook tour ........
  • Page 8 Table of Contents Removing the Mainboard ......... .63 Removing the RTC Battery .
  • Page 9 External Mouse Failure ......... . .134 Other Failures .
  • Page 10 Table of Contents...
  • Page 11: System Specifications

    Supports 512 MB / 1 GB / 2 GB soDIMMs for total system memory of up to 2 GB Display and graphics • 10.1" WSVGA high-brightness (typical 180-nit) Acer CrystalBrite™ TFT LCD, 1024 x 600 pixel resolution •...
  • Page 12: Privacy Control

    Communication • Integrated Acer Crystal Eye webcam, supporting 0.3-megapixel resolution • WLAN: Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED® network connection, supporting Acer SignalUp™ wireless technology • LAN: 10/100 Mbps Fast Ethernet • WPAN: Bluetooth® 2.0+EDR • WWAN: UMTS/HSPA at 2100 MHz and quad-band GSM/GPRS/EDGE (850/900/1800/1900 MHz),...
  • Page 13: System Block Diagram

    System Block Diagram CRT Conn page 14 LCD Conn. Thermal Sensor page 13 EMC1402 page 4 SDIO CONN MINI Card x2 page 27 Power ON/OFF DC/DC Interface page 29 & LED CONN page 26 3VALW/5VALW page 33 DC IN page 31 1.5VS/0.9VS/ 2.5VS BATT IN...
  • Page 14: Your Acer Notebook Tour

    Your Acer Notebook tour After learning about your computer features, let us show you around your new computer. Front View Icon Item Acer Crystal Eye Web camera for video communication. Webcam Microphone Internal microphone for sound recording. Display screen Also called Liquid-Crystal Display (LCD), displays computer output.
  • Page 15: Closed Front View

    Icon Closed Front View Icon Left View Icon Chapter 1 Item Wireless LAN/3G Indicates the status of wireless LAN/3G communication communication. (only for certain models) indicator Power button/ Turns the computer on and off. indicator Item Wireless Enables/disables the wireless function. communication switch Item...
  • Page 16: Right View

    Right View Icon Rear and Base View Icon Battery bay Battery lock Item Multi-in-1 card Accepts Secure Digital (SD), MultiMediaCard reader (MMC), Memory Stick (MS), Memory Stick PRO (MS PRO), xD-Picture Card (xD). Note: Push to remove/install the card. Only one card can operate at any given time.
  • Page 17: Indicators

    Icon Ventilation slots Battery release latch 3G SIM card slot Indicators The computer has several easy-to-read status indicators. The battery indicator is visible even when the computer cover is closed. Icon Function Bluetooth Wireless LAN 3G communication Num Lock Caps Lock Battery NOTE: 1.
  • Page 18: Touchpad Basics

    TouchPad Basics The following items show you how to use the TouchPad: • Move your finger across the TouchPad (1) to move the cursor. • Press the left (2) and right (3) buttons located beneath the TouchPad to perform selection and execution functions.
  • Page 19: Using The Keyboard

    Using the Keyboard Your Aspire one has a close-to-full-sized keyboard and an embedded numeric keypad, separate cursor, lock, function and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which you can toggle on and off. Lock key Caps Lock When Caps Lock is on, all alphabetic characters typed are in uppercase.
  • Page 20: Windows Keys

    Windows Keys The keyboard has two keys that perform Windows-specific functions. Windows key Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: <...
  • Page 21: Hot Keys

    <Fn> + < > <Fn> + < > Chapter 1 Function Hotkey help Displays help on hotkeys. Acer eSettings Launches Acer eSettings Management in Acer Management Empowering Technology. Acer ePower Launches Acer ePower Management in Acer Management Empowering Technology. Sleep Puts the computer in Sleep mode.
  • Page 22: Special Keys

    Special Keys You can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your keyboard. The Euro symbol Open a text editor or word processor. Hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard. NOTE: Some fonts and software do not support the Euro symbol.
  • Page 23: Hardware Specifications And Configurations

    Execute Disable Bit support for enhanced security Cache Speed Tech Size 533 MHz 45 nm 667 MHz 45 nm Fan Speed (RPM) 5200 5900 6300 Core Package Acer P/N Voltage Micro- 0.9V- KC.ANB01.270 FCBGA8 1.100V Micro- 0.9V- KC.ANB01.280 FCBGA8 1.1625V SPL Spec (dBA)
  • Page 24 System Memory Item Memory controller Memory size DIMM socket number Supports memory size per socket Supports maximum memory size Supports DIMM type Supports DIMM Speed System Storage Item Hard Disk Drive Interface Item Vendor & Seagate Model Name ST9160310AS Capacity (GB) Bytes per sector...
  • Page 25 400 - 794 typical 5V ±5% Specification InSyde v0.10 Flash 1 MB • Support ISIPP • Support Acer UI • Support multi-boot • Suspend to RAM (S3)/Disk (S4) • Various hot-keys for system control • Support SMBUS 2.0, PCI2.3 •...
  • Page 26 Keyboard Item Type Total number of keypads Windows logo key Specification 0.2175 500:1 235.5 x 143.5 x 5.2 LVDS 45/45 20/45 Specification Atheros AR8114/AR8132 • Supports 10/100 New Acer flat keyboard 84/88 with 101/102 key emulation Specification Specification Chapter 1...
  • Page 27 Item Internal & external keyboard work simultaneously Features Mini Card Item Number Supported Features Camera Item Vendor and model Type 3G Card Item Features Wireless LAN Item Type Features Battery Item Vendor & model name Battery Type Pack capacity Number of battery cell Package configuration Chapter 1 Plug USB keyboard to the USB port directly: Yes...
  • Page 28 Chapter 1...
  • Page 29: System Utilities

    System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup.
  • Page 30: Information

    Information The Information screen displays a summary of your computer hardware information. Information Main Security C P U T y p e C P U T y p e C P U S p e e d C P U S p e e d H D D M o d e l N a m e : H D D M o d e l N a m e : H D D S e r i a l N u m b e r :...
  • Page 31: Main

    Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Information Main S y s t e m T i m e : S y s t e m T i m e : S y s t e m D a t e : S y s t e m D a t e : T o t a l M e m o r y :...
  • Page 32: Security

    Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. Information Main Security S u p e r v i s o r P a s s w o r d I s : S u p e r v i s o r P a s s w o r d I s : U s e r P a s s w o r d I s : U s e r P a s s w o r d I s :...
  • Page 33 Setting a Password Follow these steps as you set the user or the supervisor password: Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears: C o n f i r m N e w P a s s w o r d Type a password in the “Enter New Password”...
  • Page 34 Changing a Password Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. E n t e r C u r r e n t P a s s w o r d C o n f i r m N e w P a s s w o r d Type the current password in the Enter Current Password field and press Enter.
  • Page 35: Boot

    Boot This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay. Information Main Security B o o t p r i o r i t y o r d e r : B o o t p r i o r i t y o r d e r :...
  • Page 36: Exit

    Exit The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. Information Main Security E x i t S a v i n g C h a n g e s E x i t S a v i n g C h a n g e s E x i t D i s c a r d i n g C h a n g e s E x i t D i s c a r d i n g C h a n g e s L o a d S e t u p D e f a u l t s...
  • Page 37: Bios Flash Utility

    BIOS Flash Utility The BIOS flash memory update is required for the following conditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility.
  • Page 38: Dos Flash Utility

    DOS Flash Utility Perform the following steps to use the DOS Flash Utility: Press F2 during boot to enter the Setup Menu. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
  • Page 39 NOTE: If the AC power is not connected, the following message displays. Plug in the AC power to continue. Flash is complete when the message Flash programming complete displays. Chapter 2...
  • Page 40: Winflash Utility

    WinFlash Utility Perform the following steps to use the WinFlash Utility: Double click the WinFlash executable. Click OK to begin the update. A progress screen displays. When the process is complete, close all programs and applications and reboot the system. Chapter 2...
  • Page 41: Remove Hdd/Bios Password Utilities

    Remove HDD/BIOS Password Utilities This section provides you with details about removing HDD/BIOS password methods: Removing HDD Password: If you key in the wrong HDD password three times, an error is generated. To reset the HDD password, perform the following steps: After the error is displayed, select the Enter Unlock Password option on the screen.
  • Page 42 Removing BIOS Passwords: To clear the User or Supervisor passwords, open the 3G bay door and use a metal instrument to short the RTC_RST jumper as shown below. Cleaning BIOS Passwords To clean the User or Supervisor passwords, perform the following steps: From a DOS prompt, execute clnpwd.exe Press 1 or 2 to clean the desired password shown on the screen.
  • Page 43: Miscellaneous Utilities

    Miscellaneous Utilities Using Boot Sequence Selector Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. To use Boot Sequence Selector, perform the following steps: Enter into DOS. Execute BS.exe to display the usage screen. Select the desired boot sequence by entering the corresponding sequence, for example, enter BS2 to change the boot sequence to HDD|CD ROM|LAN|Floppy.
  • Page 44 Manufacturer (Type1, Offset04h): Acer Product Name (Type1, Offset05h): Aspire one xxxxx Serial Number (Type1, Offset07h): 01234567890123456789 UUID String (Type1, Offset08h): xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Asset Tag (Type3, Offset04h): Acer Asstag Example 2: Write Product Name to EEPROM Input: dmitools /wp Acer Example 3: Write Serial Number to EEPROM...
  • Page 45 Execute MAC.BAT to write MAC information to eeprom. Chapter 2...
  • Page 46 Chapter 2...
  • Page 47: Machine Disassembly And Replacement

    Machine Disassembly and Replacement This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Disassembly Requirements To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge •...
  • Page 48: General Information

    General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3.
  • Page 49: External Module Disassembly Process

    External Module Disassembly Process NOTE: The product previews seen in the disassembly procedures may not represent the final product color or configuration. External Modules Disassembly Flowchart NOTE: Items enclosed with broken lines (— - - —) are optional and may not be present. Screw List Step Screw...
  • Page 50: Removing The Battery Pack

    Removing the Battery Pack 1. Turn the computer over. 2. Slide the battery lock/unlock latch to the unlock position. 3. Slide and hold the battery release latch to the release position (1), then slide out the battery pack from the main unit (2).
  • Page 51: Removing The Lower Covers

    Removing the Lower Covers 1. See “Removing the Battery Pack” on page 40. 2. Remove the four from the HDD, Memory, and 3G Covers. Step Lower Covers M2*4 3. Lift the HDD cover up to remove. Chapter 3 Size Quantity Screw Type...
  • Page 52 4. Lift the Memory cover up to remove. 5. Lift the 3G cover up to remove. Chapter 3...
  • Page 53: Removing The Hard Disk Drive Module

    Removing the Hard Disk Drive Module 1. See “Removing the Lower Covers” on page 41. 2. Remove the single screw securing the HDD Module in place. Step HDD Module M2*4 3. Slide the HDD in the direction of the arrow to disconnect the HDD from the interface connector. Chapter 3 Size Quantity...
  • Page 54 4. Lift the hard disk drive module out of the bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. 5. Remove the four screws (two each side) securing the hard disk to the carrier. Step Size Quantity...
  • Page 55: Removing The Dimm Module

    Removing the DIMM Module 1. See “Removing the Lower Covers” on page 41. 2. Push out the release latches on both sides of the DIMM socket to release the DIMM module. 3. Remove the DIMM module. Chapter 3...
  • Page 56: Removing The 3G Module

    Removing the 3G Module IMPORTANT: 3G functionality is not supported by all models. 1. See “Removing the Lower Covers” on page 41. 2. Disconnect the 3G Antenna cables from the 3G Module. IMPORTANT: The Blue cable attaches to the MAIN terminal and the Yellow cable attaches to the AUX terminal. 3.
  • Page 57 4. Detach the 3G Module from the socket. NOTE: When reattaching the antennas, ensure the cables are tucked into the chassis to prevent damage. Chapter 3...
  • Page 58: Main Unit Disassembly Process

    Main Unit Disassembly Process IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly procedures may not represent the final product color or configuration.
  • Page 59: Removing The Keyboard

    Removing the Keyboard 1. See “Removing the Battery Pack” on page 40. 2. Turn the computer rightside up and open the lid to the full extent. 3. Unlock the single securing latch above the F8 key by pressing down with plastic tweezers. IMPORTANT: The use of metal tools may damage the outer casing.
  • Page 60 6. Disconnect the FFC and remove the Keyboard. Chapter 3...
  • Page 61: Removing The Upper Cover

    Removing the Upper Cover 1. See “Removing the Keyboard” on page 49. 2. Turn the computer over. Remove the eleven securing screws. Step Upper Cover M2*3 (red callouts) Upper Cover M2*4 (green callouts) Upper Cover M2*12 (blue callout) 3. Turn the computer over and disconnect the following cables from the Mainboard. Chapter 3 Size Quantity...
  • Page 62 Release the locking latch on A as shown. Release the locking latch on B as shown. Disconnect C as shown. Disconnect A from the Mainboard. Disconnect B from the Mainboard. Chapter 3...
  • Page 63 4. Remove the five securing screws from the Upper Cover. Step Size Quantity Screw Type Upper Cover M2*4 5. Remove the Hinge Covers as shown. NOTE: The Hinge Covers are not identical; the right side cover has a longer locating pin. 6.
  • Page 64 7. Lift the left side of the Upper Cover away from the Lower Cover. 8. Lift the Upper Cover clear of the Lower Cover. Chapter 3...
  • Page 65: Removing The Power Board

    Removing the Power Board 1. See “Removing the Upper Cover” on page 51. 2. Lift the Power Board FFC to detach the adhesive securing it in place. 3. Turn the Upper Cover over and remove the single screw securing the Power Board in place. Step Power Board M2*3...
  • Page 66 4. Slide the Power Board to the right to disengage the locating pin. 5. Lift the mylar sheet away from the Upper Cover to allow the Power Board FFC to pass through the cover. 6. Remove the board from the Upper Cover. Chapter 3...
  • Page 67: Removing The Bluetooth Module

    Removing the Bluetooth Module 1. See “Removing the Upper Cover” on page 51. 2. Remove the Bluetooth Module cable from the cable channel. Ensure that the cable is free from all cable clips. 3. Lift the Bluetooth Module, left side first, to remove it from the Upper Cover. NOTE: The Bluetooth Module is held in place by a single screw (M2*3) on some models.
  • Page 68: Removing The Touchpad Ffc

    Removing the TouchPad FFC IMPORTANT: The TouchPad Board cannot be removed individually. To replace the TouchPad Board, replace the entire Upper Cover. 1. See “Removing the Upper Cover” on page 51. 2. Hold the mylar sheet in place and lift the FFC away from the Upper Cover. 3.
  • Page 69: Removing The Wlan Board

    Removing the WLAN Board 1. See “Removing the Upper Cover” on page 51. 2. Disconnect the Antenna cables from the WLAN Board. NOTE: Cable placement is Black to the MAIN terminal (left) and White to the AUX terminal (right). 3. Remove the single screw securing the WLAN Board in place. Step WLAN Board M2*3...
  • Page 70 4. Remove the WLAN Board from the Mainboard. Chapter 3...
  • Page 71: Removing The Usb Board

    Removing the USB Board 1. See “Removing the Upper Cover” on page 51. 2. Remove the single screw securing the USB Board to the Lower Cover. Step USB Board M2*4 3. Lift the USB Board, left side first to free the I/O ports from the Lower Cover. IMPORTANT: Do not fully remove the USB Board from the cover;...
  • Page 72 4. Turn the board over to expose the cable connector. Detach the adhesive strip holding the cable in place. 5. Disconnect the cable from the USB Board. 6. Remove the USB Board from the Lower Cover. Chapter 3...
  • Page 73: Removing The Mainboard

    Removing the Mainboard 1. See “Removing the USB Board” on page 61. 2. Disconnect the LVDS, AC, and Speaker cables from the Mainboard. 3. Disconnect the LVDS cable and remove the cable from the cable channel. 4. Disconnect the AC cable as shown. Chapter 3...
  • Page 74 5. Hold the adhesive strip in place on the Mainboard and remove the AC cable as shown. 6. Disconnect the Speaker cable as shown. 7. Remove the single screw securing the Mainboard to the Lower Cover. Step Size Quantity Screw Type Mainboard M2*4 Chapter 3...
  • Page 75 8. Lift the Mainboard right side first and remove it from the Lower Cover. 9. Turn the Mainboard CPU side up, and place it on a clean surface. Detach the adhesive strip holding the USB Board cable in place. 10. Disconnect the USB Board cable as shown. Chapter 3...
  • Page 76: Removing The Rtc Battery

    Removing the RTC Battery IMPORTANT: Follow local regulations for disposal of all batteries. 1. See “Removing the Mainboard” on page 63. 2. The RTC Battery is soldered to the Mainboard. To replace the battery, solder the new battery to the connections shown.
  • Page 77: Removing The Thermal Module

    Removing the Thermal Module 1. See “Removing the Mainboard” on page 63. 2. Disconnect the Fan cable from the Mainboard. 3. Remove the four securing screws from the Thermal Module in numerical order from 4 to 1. Step Thermal Module M2*4 Chapter 3 Size...
  • Page 78 4. Lift the Thermal Module clear of the Mainboard. Chapter 3...
  • Page 79: Removing The Speaker Module

    Removing the Speaker Module 1. See “Removing the Mainboard” on page 63. 2. Remove the two securing screws (one for each Speaker). Step Speaker Module M2*4 3. Lift the left Speaker out of the Lower Cover, rear edge first as shown. Chapter 3 Size Quantity...
  • Page 80 4. Remove the Speaker cable from the cable channel. Ensure that the cable is free from all cable clips. 5. Lift the right Speaker out of the Lower Cover, rear edge first as shown. 6. Lift the Speaker Module clear of the Lower Cover. Chapter 3...
  • Page 81: Removing The Lcd Module

    Removing the LCD Module IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of the LCD Module, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The following procedure outlines the steps to remove the LCD Module on models with 3G functionality.
  • Page 82 4. Remove the adhesive strips securing the yellow 3G cable in place. 5. Remove the cable from the cable clips. 6. Remove the blue 3G cable from the cable clips as shown. Chapter 3...
  • Page 83 7. Remove the two securing screws from the LCD brackets. Step LCD Module M2*4 IMPORTANT: Ensure all cables are clear of the lower cover before removing the LCD module. 8. Grasp the module with both hands and lift upwards to remove the LCD Module. Chapter 3 Size Quantity...
  • Page 84: Removing The Ac Power Jack

    Removing the AC Power Jack 1. See “Removing the Mainboard” on page 63. 2. The AC Power cable runs as shown along the Lower Cover. 3. Remove the AC Power cable from the cable channel. Ensure that the cable is free from all cable clips. 4.
  • Page 85: Lcd Module Disassembly Process

    LCD Module Disassembly Process IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly procedures may not represent the final product color or configuration.
  • Page 86: Removing The Lcd Bezel

    Removing the LCD Bezel 1. See “Removing the LCD Module” on page 71. 2. Remove the four screw caps and screws from the LCD Bezel. NOTE: The two center screw caps at the top of the bezel are for protection only. Step LCD Bezel M2*4...
  • Page 87 4. Work down the left side as shown, then pry apart the bottom edge to remove the bezel. 5. Lift up the bezel and remove it from the LCD Module. Chapter 3...
  • Page 88: Removing The Camera Board

    Removing the Camera Board 1. See “Removing the LCD Bezel” on page 76. 2. Disconnect the cable from the Camera Board as shown. 3. Remove the Camera Board from the LCD Module. Chapter 3...
  • Page 89: Removing The Lcd Panel

    Removing the LCD Panel 1. See “Removing the Camera Board” on page 78. 2. Remove the two securing screws from the LCD Panel. Step LCD Panel M2*4 3. Remove the LVDS cable from the cable channel in the bracket. 4. Lift the panel as shown to expose the LVDS and Microphone cables. IMPORTANT: Do not remove the panel at this stage to avoid damaging the cables.
  • Page 90 5. Remove the Microphone cable from the cable channel as shown. Ensure that the cable is free from all cable clips. 6. Lift the Microphone Module upward to detach the adhesive holding it in place. 7. Remove the LCD Panel from the LCD Module. Chapter 3...
  • Page 91: Removing The Lcd Brackets And Fpc Cable

    Removing the LCD Brackets and FPC Cable 1. See “Removing the LCD Panel” on page 79. 2. Turn the LCD panel over on a clean surface. Carefully lift the adhesive tape securing the cable connector to the LCD Panel. 3. Hold the adhesive tape clear of the LCD Panel and disconnect the LCD cable as shown. 4.
  • Page 92 5. Remove the two screws securing the Hinge Covers to the brackets. NOTE: The LCD Brackets are not identical. Ensure that the correct bracket is used during reassembly. Step Hinge Covers M2*3 6. Remove the Hinge Covers from the left and right brackets as shown. NOTE: If the LCD Brackets are replaced, ensure that the rubber cable connectors are removed from the faulty brackets and installed on the replacements.
  • Page 93: Removing The Antennas

    Removing the Antennas IMPORTANT: The LCD Module configuration differs depending on supported functions. Only the 3G model is disassembled in this procedure, though the method is the same. For 3G enabled models, the LCD Module appears as follows when the LCD Panel is removed: Blue callout—Main 3G Antenna cable •...
  • Page 94 1. See “Removing the LCD Panel” on page 79. 2. Lift all the adhesive strips securing the yellow 3G Antenna cable in place and remove the cable from the cable channel. 3. Carefully pry up the Antenna pad, as shown, and remove the pad from the LCD Module. IMPORTANT: A strong adhesive is used to secure the Antenna pad in place.
  • Page 95 5. Carefully pry up the Antenna pad, as shown, and remove the pad from the LCD Module. IMPORTANT: A strong adhesive is used to secure the Antenna pad in place. Take care not to bend the pad during removal. 6. Lift all the adhesive strips securing the white and black WLAN Antenna cables in place and remove the cable from the cable channel.
  • Page 96: Lcd Module Reassembly Procedure

    LCD Module Reassembly Procedure Replacing the Antennas 1. Remove the protective covering on the Antenna pads. Place the WLAN Antenna pads in the LCD Module and press down to secure the adhesive in place. 2. Run the cables along the edges of the LCD Module using all the available adhesive securing strips. 3.
  • Page 97 4. Run the cables along the edges of the LCD Module using all the available adhesive securing strips. 5. Remove the protective covering on the Auxiliary 3G Antenna pad. Place the pad in the LCD Module and press down to secure the adhesive in place. 6.
  • Page 98 NOTE: The LCD Module appears as shown when the Antennas are replaced correctly. 3G and WLAN Models WLAN Only Models Chapter 3...
  • Page 99: Replacing The Lcd Cable And Brackets

    Replacing the LCD Cable and Brackets NOTE: If the LCD Brackets were replaced, ensure that the rubber cable connectors are removed from the faulty brackets and installed on the replacements. 1. Replace the Hinge Covers on the left and right LCD Brackets. IMPORTANT: The left and right Hinge Covers are not identical;...
  • Page 100 2. Replace the two screws securing the Hinge Covers to the brackets. NOTE: The LCD Brackets are not identical. Ensure that the correct bracket is used during reassembly. Left Right Bracket Bracket 3. replace the four screws (two each side) securing the LCD Brackets to the LCD Panel. 4.
  • Page 101 IMPORTANT: Ensure that the LCD Cable runs as shown to avoid trapping when the Bezel is replaced. Chapter 3...
  • Page 102: Replacing The Lcd Panel

    Replacing the LCD Panel 1. Place the Microphone Module in to the LCD Module and press down to secure the adhesive holding it in place. 2. Run the Microphone cable down the side of the LCD Module as shown, using all available adhesive and cable clips.
  • Page 103: Replacing The Camera Board

    4. Ensure the cables and Antennas pass through the hinge wells as shown. 5. Replace the two securing screws. Replacing the Camera Board 1. Align the locating slots on the Camera Module with the locating pins on the LCD Module. Chapter 3 2.
  • Page 104 3. Connect the Camera cable as shown. Chapter 3...
  • Page 105: Replacing The Lcd Bezel

    Replacing the LCD Bezel 1. Replace the bezel bottom edge first as shown. Ensure that the cables are not trapped between the bezel and LCD Module and pass through the hinge wells. 2. Press down around the edges of the bezel until there are no gaps between the covers. 3.
  • Page 106: Main Module Reassembly Procedure

    Main Module Reassembly Procedure Replacing the AC Power Jack 1. Place the AC Power Jack in the Lower Cover as shown. Press down to secure it in place. 3. Run the cable around the HDD bay as shown using all available cable clips. 4.
  • Page 107: Replacing The Lcd Module

    Replacing the LCD Module 1. Place the LCD Module on the Lower Cover and secure it in place with the four screws. 2. Run the blue 3G cable along the cable channel as shown using all available cable clips. Chapter 3...
  • Page 108 3. Run the cable as shown in to the 3G bay using all available cable clips. 4. Run the yellow 3G cable along the cable channel as shown using all available cable clips. 5. Run the cable as shown in to the 3G bay and secure it in place with adhesive strips. Chapter 3...
  • Page 109 6. Run the WLAN Antennas over the yellow 3G Antenna, using the same cable channel and clips. 7. The Lower Cover appears as follows when all the LCD cables and Antennas are correctly placed. Blue callout—Main 3G Antenna cable • Yellow callout—Aux 3G Antenna cable •...
  • Page 110: Replacing The Speaker Module

    Replacing the Speaker Module 1. Replace the right Speaker in the Lower Cover bottom edge first to engage the securing clip. 2. Run the speaker cable behind the screw column and along the front edge of the Lower Cover as shown. Ensure that the cable is secured using all the available cable clips.
  • Page 111: Replacing The Thermal Module

    4. Replace the two securing screws (one in each Speaker). Replacing the Thermal Module IMPORTANT: Ensure all heat pads are in place before replacing the Thermal Module. The following thermal pads are approved for use: Eapus XR-PE • 1. Align the screw holes on the Thermal Module and Mainboard and replace the module.
  • Page 112: Replacing The Mainboard

    Replacing the Mainboard 1. Connect the USB Board cable to the Mainboard. 3. Turn the Mainboard over and insert it into the Lower Cover left side first to ensure the I/O ports pass through the casing. 5. Connect the Speaker cable to the Mainboard. 2.
  • Page 113 7. Run the LVDS cable along the cable channel as 8. Connect the LVDS cable to the Mainboard. shown. Chapter 3...
  • Page 114: Replacing The Usb Board

    Replacing the USB Board 1. Connect the USB cable to the connector on the underside of the USB Board. 3. Turn the USB Board over and insert it in to the Lower Cover, right side first. Ensure that the USB ports are accessible through the casing.
  • Page 115: Replacing The Wlan Board

    4. Lower the USB Board in to the Lower Cover and replace the single securing screw. Replacing the WLAN Board 1. Insert the WLAN Board in to the Mainboard socket, 3. Connect the WLAN Antennas to the WLAN Board terminals. NOTE: Cable placement is Black to the MAIN terminal (left) and White to the AUX terminal (right).
  • Page 116: Replacing The Touchpad Ffc

    Replacing the TouchPad FFC 1. Insert the FFC in to the TouchPad connector. 3. Press the FFC down on the Upper Cover to secure it in place. Replacing the Bluetooth Module 1. Connect the Bluetooth cable to the Bluetooth Module. 2.
  • Page 117 3. Press the Bluetooth Module down to secure it in 4. Run the Bluetooth cable along the cable channel as place. shown using all available cable clips. NOTE: The Bluetooth Module is held in place by a single screw (M2*3) on some models. Chapter 3...
  • Page 118: Replacing The Power Board

    Replacing the Power Board 1. Insert the Power Board FFC under the mylar cover as shown. 2. Pull the FFC through the Upper Cover until none of the FFC is visible from the underside. 3. Place the Power Board in the Upper Cover and slide it to the left to engage the securing clips.
  • Page 119 5. Turn the cover over and run the FFC along the Upper Cover and press down to secure the adhesive in place. Chapter 3...
  • Page 120: Replacing The Upper Cover

    Replacing the Upper Cover 1. Place the Upper Cover on the Lower Cover rear edge first as shown. 3. Continue pressing down both sides of the Upper Cover and along the bottom edge to snap the covers together. NOTE: Ensure there are no gaps between the Upper and Lower Covers. 4.
  • Page 121 5. Replace the five securing screws in the Upper Cover. 6. Reconnect the following cables to the Mainboard. Connect A to the Mainboard. Chapter 3 Secure the locking latch on A as shown.
  • Page 122 Connect B to the Mainboard. Secure the locking latch on B as shown. Connect C as shown. 7. Turn the computer over and replace the eleven securing screws as shown. NOTE: Ensure the correct screw type is used for each hole: M2*3 (red callout), M2*4 (green callout), and M2*12 (blue callout).
  • Page 123: Replacing The Keyboard

    Replacing the Keyboard 1. Turn the computer over. Insert the Keyboard FFC in to the Mainboard connector. 3. Turn the Keyboard over and slide it in the direction of the arrow. IMPORTANT: Ensure the four securing pins are correctly located. 4.
  • Page 124 3. Connect the two Antenna cables to the 3G Module. IMPORTANT: The Blue cable attaches to the MAIN terminal and the Yellow cable attaches to the AUX terminal. Chapter 3...
  • Page 125: Replacing The Dimm Module

    Replacing the DIMM Module 1. Insert the DIMM Module in to the DIMM slot. Replacing the Hard Disk Drive Module 1. Insert the HDD in to the HDD Carrier and secure the Carrier to the HDD by replacing the four screws. 2.
  • Page 126 4. Replace the single screw to secure the HDD in place. Chapter 3...
  • Page 127: Replacing The Lower Covers

    Replacing the Lower Covers 1. Replace the 3G Cover and press down around the perimeter to snap it in to place. 3. Replace the HDD Cover and press down around the perimeter to snap it in to place. 4. Replace the four screws securing the covers in place. Chapter 3 2.
  • Page 128: Replacing The Battery Pack

    Replacing the Battery Pack 1. Slide and hold the battery release latch to the release position (1), then insert the battery pack in to the main unit (2). 2. Slide the battery lock/unlock latch to the lock position. Chapter 3...
  • Page 129: Troubleshooting

    Common Problems Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. Obtain the failing symptoms in as much detail as possible.
  • Page 130: Power On Issue

    Power On Issue If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Computer Shuts down Intermittently If the system powers off at intervals, perform the following actions one at a time to correct the problem. Check the power cable is properly connected to the computer and the electrical outlet.
  • Page 131: No Display Issue

    No Display Issue If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Replace LCD panel/cable No POST or Video If the POST or video doesn’t display, perform the following actions one at a time to correct the problem. Make sure that the internal display is selected.
  • Page 132: Random Loss Of Bios Settings

    Abnormal Video Display If video displays abnormally, perform the following actions one at a time to correct the problem. Reboot the computer. If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced. See “Disassembly Process” on page 38. If extensive pixel damage is present (different colored spots in the same locations on the screen), the LCD is faulty and should be replaced.
  • Page 133: Lcd Failure

    LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Chapter 4 Start...
  • Page 134: Touchpad Failure

    TouchPad Failure If the TouchPad doesn’t work, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Check M/B T/P FFC Check Logic Upper Swap M/B Re-assemble the T/P FFC to Swap/Re- assemble the T/P board or T/P FFC...
  • Page 135: Internal Speaker Failure

    Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Sound Problems If sound problems are experienced, perform the following actions one at a time to correct the problem. Reboot the computer.
  • Page 136 Remove and recently installed hardware or software. Restore system and file settings from a known good date using System Restore. If the issue is not fixed, repeat the preceding steps and select an earlier time and date. 10. Reinstall the Operating System. 11.
  • Page 137: Internal Microphone Failure

    Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Microphone Problems If internal or external Microphones do no operate correctly, perform the following actions one at a time to correct the problem.
  • Page 138: Hdd Not Operating Correctly

    HDD Not Operating Correctly If the HDD does not operate correctly, perform the following actions one at a time to correct the problem. Disconnect all external devices. Run a complete virus scan using up-to-date software to ensure the computer is virus free. Run the Windows Vista Startup Repair Utility: insert the Windows Vista Operating System DVD in the ODD and restart the computer.
  • Page 139: Usb Failure (Rightside)

    USB Failure (Rightside) If the rightside USB port fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Chapter 4 Start Check IO/B to M/B CONN Check IO/B Swap M/B Re-assemble the IO/B CONN to M/B Swap IO/B...
  • Page 140: Wireless Function Test Failure

    Wireless Function Test Failure If the wireless function test fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Check WL antenna to WL card Check antenna Check WL card Swap M/B Re-assemble the antenna to WL card...
  • Page 141: 3G Function Test Failure

    3G Function Test Failure If the 3G function test fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Chapter 4 Start Check 3G antenna to 3G card Check antenna Check 3G card Swap M/B Re-assemble...
  • Page 142: Switch Failure

    Switch Failure If the switches fail, perform the following actions one at a time to correct the problem. Do not replace non- defective FRUs: Start Check IO/B to M/B FFC Check IO/B and FFC Swap M/B Re-assemble the IO/B FFC to M/B Swap The IO/B Chapter 4...
  • Page 143: Thermal Units Failure

    Thermal Units Failure If the thermal units fail, perform the following actions one at a time to correct the problem. Do not replace non- defective FRUs: Power Button Failure If the Power Button fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Chapter 4 START...
  • Page 144: External Mouse Failure

    External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correct the problem. Try an alternative mouse. If the mouse uses a wireless connection, insert new batteries and confirm there is a good connection. See the mouse user manual.
  • Page 145: Intermittent Problems

    Issue” on page 120): Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: • Non-Acer devices • Printer, mouse, and other external devices • Battery pack •...
  • Page 146: Motherboard Cmos Discharge

    Motherboard CMOS Discharge If any problems such as incorrect CMOS settings, the CMOS data can be cleared by short-circuiting the CMOS J6 jumpers. Open the 3G bay door and short-circuit the jumpers near the 3G connector, using a metal conductivity tool. Chapter 4...
  • Page 147: Post Code Reference Tables

    POST Code Reference Tables These tables describe the POST codes and components of the POST process. Sec: NO_EVICTION_MODE_DEBUG EQU 1 (CommonPlatform\sec\Ia32\SecCore.inc) Code 0xC2 MTRR setup 0xC3 Enable cache 0xC4 Establish cache tags 0xC5 Enter NEM, Place the BSP in No Fill mode, set CR0.CD = 1, CR0.NW = 0. 0xCF Cache Init Finished Memory:...
  • Page 148: Bds & Specific Action

    Code 0x27 Enable DRAM Channel I/O Buffers 0x28 Enable all clocks on populated rows 0x29 Perform JEDEC memory initialization for all memory rows 0x30 Perform steps required after memory init 0x31 Program DRAM throttling and throttling event registers 0x32 Setup DRAM control register for normal operation and enable 0x33 Enable RCOMP 0x34...
  • Page 149: Each Peim Entry Point Used In 80_Port

    Each PEIM entry point used in 80_PORT Code 0x00 0x01 PEI_EVENT_LOG 0xA1 PEI_OEM_SERVICE 0xA2 PEI_SIO_INIT 0xA3 PEI_MONO_STATUS_CODE 0xA4 PEI_CPU_IO_PCI_CFG 0x06 PEI_CPU_IO 0x07 PEI_PCI_CFG 0xA5 PEI_CPU_PEIM 0xA6 PEI_PLATFORM_STAGE1 0xA7 PEI_VARIABLE 0xA8 PEI_SB_INIT 0x0C PEI_CAPSULE 0xAA PEI_PLATFORM_STAGE2 0xAC PEI_SB_SMBUS_ARP_DISABLED 0x0F PEI_HOST_TO_SYSTEM 0x40 PEI_MEMORY_INIT 0x41 PEI_S3_RESUME...
  • Page 150 Code 0xC4 SECURITY_STUB 0xC5 DXE_CPU_IO 0xC6 CF9_RESET 0xC7 PC_RTC 0xC8 STATUS_CODE 0xC9 VARIABLE EMU_VARIABLE 0xD9 DXE_CHIPSET_INIT 0x45 DXE_ALERT_FORMAT 0xD6 PCI_HOST_BRIDGE 0xD7 PCI_EXPRESS 0xD5 DXE_SB_INIT 0xDA IDE_CONTROLLER 0xDB SATA_CONTROLLER 0xDD SB_SM_BUS 0xE7 ISA_ACPI_DRIVER 0xE8 ISA_BUS 0xE9 ISA_SERIAL 0xED BUS_PCI_UNDI 0xEC PCI_BUS 0xF6 BOOT_PRIORITY 0xF7...
  • Page 151 Code 0x72 MONITER_KEY 0x73 LEGACY_BIOS 0x75 LEGACY_BIOS_PLATFORM 0x76 PCI_PLATFORM 0x6C ISA_FLOOPY 0x6D PS2_MOUSE 0x6E USB_BOT 0x6F USB_CBI0 0x74 USB_MOUSE 0xFA SETUP_UTILITY 0x90 FW_BLOCK_SERVICE 0x78 SMM_USB_LEGACY 0x86 GRAPHICS_CONSOLE 0x87 TERMINAL 0x8A DATA_HUB_STD_ERR 0x7C 0x7D PARTITION 0x7E ENGLISH 0x7F FRENCH 0x9E HII_DATABASE 0x9F OEM_SETUP_BROWSER 0x8C...
  • Page 152: Each Smmdriver Entry Point Used In 80_Port

    Each SmmDriver entry point used in 80_PORT Code 0xD4 SMM_ACCESS 0xDE SMM_CONTROL 0xCC SMM_BASE 0xD2 SMM_RUNTIME 0xDF SB_SMM_DISPATCH 0xD0 SMM_THUNK 0xCA SMM_ACPI_SW_CHILD 0xFE SMM_PLATFORM 0xD8 SMM_GMCH_MBI 0x90 SMM_FW_BLOCK_SERVICE 0x91 SMM_VARIABLE 0x92 SMM_IHISI 0x93 SMM_INT15_MICROCODE 0x94 SMM_PNP 0x95 SMM_INIT_PPM 0xD3 SMM_OEM_SERVICE Description Chapter 4...
  • Page 153: Jumper And Connector Locations

    Jumper and Connector Locations Top View Item Description To PWR/B connector JP12 Internal keyboard connector JP20 Speaker connector JP11 Internal track-pad connector JLVDS1 LCD connector JBT1 Bluetooth connector PJP1 To Power core connector PJP2 Battery connector Chapter 5 Item Description Left button Right button Bluetooth button...
  • Page 154: Bottom View

    Bottom View Item JDIM1 DDR2 Socket JMINI1 MINI card (wireless) socket JCRT1 CRT connector JRJ45 RJ45 LAN connector JUSB1 External USB connector JHP1 Headphone connector JMIC1 Mic-in connector Description Item JMINI2 JP13 Description MINI card (3G) socket Fan connector SIM card connector To Cardreader/B connector Chapter 5...
  • Page 155: Power Board

    Power board Item LED1 Chapter 5 Description Power button Power LED...
  • Page 156: Card Reader Board

    Card reader board Item JUSB1 External USB connector JUSB2 External USB connector JREAD1 Card reader connector JSATA1 HDD connector Description Item LED2 LED3 Description To M/B connector 3G/WLAN switch 3G(WWAN) LED Wireless LED Chapter 5...
  • Page 157: Clearing Password Check And Bios Recovery

    Clearing Password Check and BIOS Recovery This section provide you the standard operating procedures of clearing password and BIOS recovery for Aspire one. Aspire one provides one Hardware Open Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery. Clearing Password Check Hardware Open Gap Description Item...
  • Page 158: Bios Recovery By Crisis Disk

    BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
  • Page 159: Fru (Field Replaceable Unit) List

    Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer machines.
  • Page 160: Aspire One Exploded Diagrams

    Aspire one Exploded Diagrams Main Assembly Item Description Part Number Left Hinge Cover 42.S6802.002 Upper Cover 60.S6802.001 Mainboard MB.S7206.001 CPU Fan 60.S6802.006 Thermal Module WLAN Card NI.23600.048 Lower Cover 60.S6902.001 Right Hinge Cover 42.S6802.001 USB Board 55.S6802.002 Chapter 6...
  • Page 161: Rear Assembly

    Rear Assembly Item Chapter 6 Description Part Number Memory Door 42.S6802.003 3G Door 42.S6802.005 HDD Door 42.S6802.004 Lower Cover 60.S6902.001...
  • Page 162: Upper Cover Assembly

    Upper Cover Assembly Item Description Part Number TouchPad FFC 50.S6802.002 Upper Cover 60.S6802.001 Power Board 55.S6802.001 Chapter 6...
  • Page 163: Lower Cover Assembly

    Lower Cover Assembly Item Chapter 6 Description Speaker Module Lower Cover AC Power Jack and Cable Part Number 23.S6802.001 60.S6902.001 50.S6802.003...
  • Page 164: Lcd Assembly

    LCD Assembly Item Description LCD Bezel LCD Panel Camera Module LVDS and Microphone Cable Left LCD Bracket Auxiliary 3G Antenna Main 3G Antenna Right LCD Bracket WLAN Antennas LCD Cover Part Number 60.S6802.004 LK.10105.001 57.S6802.001 50.S6702.001 60.S6802.005 50.S7202.002 50.S7202.002 60.S6802.005 50.S7202.003 60.S6802.003 Chapter 6...
  • Page 165: Aspire One Fru List

    Battery SONY UM-2008B Li-Ion 3S2P SONY 6 cell 5200mAh Main COMMON black Battery SONY UM-2008BW Li-Ion 3S2P SONY 6 cell 5200mAh Main COMMON white Battery SIMPLO UM-2008A Li-Ion 3S2P PANASONIC 6 cell 4400mAh Main COMMON Macles Chapter 6 Acer Description AcerPN AP.03001.001 AP.03003.001 AP.0300A.001 BT.00303.008 BT.00303.009 BT.00304.001...
  • Page 166 HMP112S6EFR6C-Y5 LF 64*16 0.055um Memory SAMSUNG SO-DIMM DDRII 667 512MB M470T6464QZ3-CE6 LF Memory HYNIX SO-DIMM DDRII 667 512MB HYMP164S64CP6-Y5 LF 64*16 0.065um Board Foxconn Bluetooth FOX_BRM_2.0 F/W 300 POWER BOARD Acer Description AcerPN BT.00607.033 BT.00607.039 BT.00607.040 BT.00607.042 BT.00607.044 BT.00607.055 BT.00607.056 KC.ANB01.270...
  • Page 167 UPPER CASE ASSY FOR W/O BT-RED UPPER CASE ASSY FOR W/BT F-YELLOW UPPER CASE ASSY FOR W/O BT-YELLOW UPPER CASE ASSY FOR W/BT F-BLUE UPPER CASE ASSY FOR W/O BT-BLUE Chapter 6 Acer Description AcerPN 55.S6802.002 NI.23600.048 LC.21300.007 LC.21300.005 LC.21300.004 50.S6802.001...
  • Page 168 White Arabic Keyboard 8KB-FV2 White Macles Internal Standard 85KS White Belgium Keyboard 8KB-FV2 White Macles Internal Standard 85KS White Brazilian Portuguese Keyboard 8KB-FV2 White Macles Internal Standard 85KS White Canadian French Acer Description AcerPN 60.S6702.005 60.S6702.006 60.S6902.001 60.S6902.002 42.S6802.001 42.S6802.002 42.S6902.001...
  • Page 169 White US International w/ Hebrew Keyboard 8KB-FV2 White Macles Internal Standard 88KS White Japanese Keyboard 8KB-FV2 White Macles Internal Standard 85KS White Nordic Keyboard 8KB-FV2 White Macles Internal Standard 85KS White FR/Arabic Chapter 6 Acer Description AcerPN KB.INT00.696 KB.INT00.705 KB.INT00.694 KB.INT00.693 KB.INT00.691 KB.INT00.690 KB.INT00.689...
  • Page 170 Keyboard 8KB-FV1 Black Macles Internal Standard 85KS Black Spanish Keyboard 8KB-FV1 Black Macles Internal Standard 85KS Black Sweden Keyboard 8KB-FV1 Black Macles Internal Standard 85KS Black Swiss/G Keyboard 8KB-FV1 Black Macles Internal Standard 84KS Black Thailand Acer Description AcerPN KB.INT00.703 KB.INT00.513 KB.INT00.544 KB.INT00.543 KB.INT00.542 KB.INT00.541 KB.INT00.540...
  • Page 171 LCD BEZEL-WHITE camera LCD BEZEL-BLACK camera LCD CABLE LCD BRACKET-R&L LCD HINGE COVER R-WHITE LCD HINGE COVER R-BLACK LCD HINGE COVER L-BLACK LCD HINGE COVER L-WHITE CAMERA MODULE-0.3M Chapter 6 Acer Description AcerPN KB.INT00.516 KB.INT00.515 KB.INT00.514 KB.INT00.548 KB.INT00.545 KB.I0800.004 KB.INT00.546 LK.10105.001 LK.10106.001...
  • Page 172 HINGE CAP MYLAR R-YELLOW HINGE CAP MYLAR L-YELLOW HINGE CAP MYLAR R-GREEN HINGE CAP MYLAR L-GREEN HINGE CAP MYLAR R-BLUE HINGE CAP MYLAR L-BLUE LCD SCREW PAD-WHITE LCD SCREW PAD-BLACK Acer Description AcerPN MB.S7206.001 MB.S6806.001 MB.S7206.002 MB.S6806.002 60.S6802.006 23.S6802.001 47.S6802.002 47.S7202.001...
  • Page 173: Screw List

    SCREW M3.0D 3.0L K 4.9D NI SCREW M2D 12L K 4.2D BNI NL SCREW M1.6D 3L K 3.1D ZK NL CR3 SCREW M2D 4.0L K 4.6D NI NL SCREW M2D 12L K 4.6D NI NL Chapter 6 Acer Description AcerPN 86.S6802.001 86.S6802.002 86.S6802.003 86.S6802.004 86.S6802.005...
  • Page 174: Model Definition And Configuration

    ACLA-Spanish AOD250-0Bb ACLA-Spanish AOD250-0Bb Canada AOD250-0Bb Canada AOD250-0Bb Canada AOD250-1Bb CHINA Hong Kong Appendix A Acer Part No Description LU.S680B.081 AOD250-1Bb AOXPHSTTH1 MC UMACbb 1*1G/160/BT/3L/5R/ CB_bg_0.3D_BAG_GEb_TH22 LU.S680B.080 AOD250-1Bb AOXPHSTHK2 MC UMACbb 1*1G/160/BT/6L/5R/ CB_bg_0.3D_BAG_GEb_ZH31 LU.S6805.001 AOD250-15b XPHSTCN1 MC UMACbb 1*1G/160/3L/5R/ CB_bg_0.3D_BAG_GEb_SC11 LU.S680B.078...
  • Page 175 EMEA Middle East AOD250-1Bb EMEA Middle East AOD250-1Bb EMEA AOD250-1Bb EMEA Turkey AOD250-1Bb EMEA Ukraine Acer Part No Description LU.S680B.066 AOD250-0Bb AOXPHSTUS1 MC UMACbb 1*1G/160/3L/5R/ CB_bg_0.3D_GEb_EN31 LU.S680B.065 AOD250-0Bb AOXPHSTUS1 MC UMACbb 1*1G/160/3L/5R/ CB_bg_0.3D_GEb_EN33 LU.S680B.064 AOD250-0Bb AOXPHSTUS1 MC UMACbb 1*1G/160/3L/5R/ CB_bg_0.3D_GEb_EN35 LU.S680B.063...
  • Page 176 Singapore AOD250-1Bb EMEA Hungary AOD250-1Bb EMEA Italy AOD250-1Bb EMEA Italy AOD250-1Bb EMEA Israel Appendix A Acer Part No Description LU.S680B.056 AOD250-1Bb AOXPHSTCN1 MC UMACbb 1*1G/160/3L/ CB_bg_0.3D_BAG_GEb_SC11 LU.S680B.057 AOD250-1Bb AOXPHSTPH1 MC UMACbb 1*1G/160/BT/6L2.6/ CB_bg_0.3D_BAG_GEb_EN12 LU.S680B.055 AOD250-1Bb AOXPHSTHK2 MC UMACbb 1*1G/160/3L/ CB_bg_0.3D_BAG_GEb_ZH31 LU.S680B.005...
  • Page 177 AOD250-1Bb EMEA Holland AOD250-1Bb EMEA Sweden AOD250-1Bb EMEA Norway AOD250-1Bb EMEA Belgium AOD250-1Bb Japan Acer Part No Description LU.S680B.012 AOD250-1Bb EM AOXPHSTME3 MC UMACbb 1*1G/160/BT/6L/ CB_bg_0.3D_GEb_FR22 LU.S680B.028 AOD250-1Bb AOXPHSTEU7 MC UMACbb 1*1G/160/BT/6L/ CB_bg_0.3D_GEb_EN11 LU.S680B.025 AOD250-1Bb AOXPHSTEU7 MC UMACbb 1*1G/160/BT/6L/ CB_bg_0.3D_GEb_ENR2 LU.S680B.033...
  • Page 178 Hong Kong AOD250-15k CHINA China AOD250-0Bk AOD250-0Bk AOD250-0Bk AOD250-0Bk India AOD250-1Bk India AOD250-0Bk Japan Appendix A Acer Part No Description LU.S680B.043 AOD250-1Bb AOXPHSTTW1 MC UMACbb 1*1G/160/BT/6L/ CB_bg_0.3D_BAG_GEb_TC11 LU.S680B.051 AOD250-1Bb AOXPHSTPH1 MC UMACbb 1*1G/160/3L/ CB_bg_0.3D_BAG_GEb_EN12 LU.S680B.040 AOD250-1Bb AOXPHSTDK1 MC UMACbb 1*1G/160/BT/6L/ CB_bg_0.3D_GEb_NO12 LU.S680B.036...
  • Page 179 AOD250-1Bk Japan AOD250-0Bk Australia/New Zealand AOD250-0Bk Japan AOD250-0Bk Australia/New Zealand AOD250-1Bk Indonesia AOD250-1Bk Malaysia Acer Part No Description LU.S670B.028 AOD250-0Bk AOXPHSTCA2 MC UMACks 1*1G/160/3L/5R/ CB_bg_0.3D_GEk_FR31 LU.S670B.027 AOD250-0Bk AOXPHSTCA2 MC UMACks 1*1G/160/3L/5R/ CB_bg_0.3D_GEk_FR34 LU.S670B.026 AOD250-0Bk AOXPHSTCA2 MC UMACks 1*1G/160/3L/5R/ CB_bg_0.3D_GEk_FR33 LU.S670B.024...
  • Page 180 CHINA China AOD250-0Br Canada AOD250-0Br Canada AOD250-0Br Canada AOD250-0Br AOD250-0Br India AOD250-1Br India Appendix A Acer Part No Description LU.S670B.009 AOD250-1Bk AOXPHSTTH1 MC UMACks 1*1G/160/BT/3L/ CB_bg_0.3D_BAG_GEk_TH22 LU.S670B.008 AOD250-1Bk AOXPHSTTW1 MC UMACks 1*1G/160/BT/6L2.6/ CB_bg_0.3D_BAG_GEk_TC11 LU.S670B.002 AOD250-1Bk AOXPHSTTW1 MC UMACks 1*1G/160/BT/6L/ CB_bg_0.3D_BAG_GEk_TC11 LU.S670B.004...
  • Page 181 AOD250-1Br Japan AOD250-1Br GCTWN AOD250-0Br Australia/New Zealand AOD250-0Br Australia/New Zealand AOD250-0Br Japan AOD250-1Br Indonesia Acer Part No Description LU.S700B.031 AOD250-1Br AOXPHSJP1 MC UMACrr 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_BAG_GEk_JA11 LU.S700B.028 AOD250-0Br AOXPHSTUS1 MC UMACrr 1*1G/160/3L/5R/ CB_bg_0.3D_GEk_EN33 LU.S700B.027 AOD250-0Br AOXPHSTUS1 MC UMACrr 1*1G/160/3L/5R/ CB_bg_0.3D_GEk_EN35 LU.S700B.026...
  • Page 182 AOD250-1Bw CHINA Hong Kong AOD250-1Bw Thailand AOD250-15w CHINA China AOD250-0Bw AOD250-0Bw AOD250-0Bw AOD250-0Bw Appendix A Acer Part No Description LU.S700B.001 AOD250-1Br AOXPHSTMY1 MC UMACrr 1*1G/160/BT/6L/ CB_bg_0.3D_BAG_GEk_EN12 LU.S700B.008 AOD250-1Br AOXPHSTMY1 MC UMACrr 1*1G/160/BT/3L/ CB_bg_0.3D_BAG_GEk_EN12 LU.S700B.007 AOD250-1Br AOXPHSTSG1 MC UMACrr 1*1G/160/BT/6L/ CB_bg_0.3D_BAG_GEk_EN11 LU.S700B.002...
  • Page 183 ACLA- Portuguese AOD250-0Bw Canada AOD250-1Bw CHINA Hong Kong AOD250-0Bw Canada AOD250-0Bw Canada AOD250-1Bw GCTWN AOD250-1Bw Acer Part No Description LU.S690B.032 AOD250-0Bw AOXPHSTUS1 MC UMACwk 1*1G/160/3L/5R/ CB_bg_0.3D_GEw_EN35 LU.S690B.035 AOD250-0Bw AOXPHSTUS1 MC UMACwk 1*1G/160/3L/5R/ CB_bg_0.3D_GEw_EN34 LU.S690B.031 AOD250-0Bw AOXPHSTIN1 MC UMACwk 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_BAG_GEw_EN11 LU.S690B.029...
  • Page 184 AOD250-1Bw GCTWN AOD250-1Bw Philippines AOD250-1Bw Philippines AOD250-1Bw Singapore AOD250-1Bw CHINA China AOD250-1Bw Malaysia Appendix A Acer Part No Description LU.S690B.017 AOD250-1Bw AOXPHSJP1 MC UMACwk 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_BAG_GEw_JA11_Bk LU.S690B.016 AOD250-1Bw AOXPHSPJP1 MC UMACwk 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_BAG_GEw_JA11_Bk LU.S690B.011 AOD250-1Bw AOXPHSTTW1 MC UMACwk 1*1G/160/BT/6L2.6/ CB_bg_0.3D_BAG_GEw_TC11 LU.S690B.015...
  • Page 185 AOD250-1BGb EMEA Italy AOD250-1BGb EMEA Italy AOD250-1BGb EMEA Greece AOD250-0BGb EMEA AOD250-1BGb EMEA Austria Acer Part No Description S2.S690B.001 AOD250-0Bw AOXPHSTWW1 MC UMACwk 1*1G/160/BT/3L/ CB_bg_0.3D_GEw_ENX1 S2.S720B.003 AOD250-1BGb AOXPHSTWW1 MC UMAGCbb 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_3G_BAG_GEb_ENX1 S2.S720B.004 AOD250-1BGb AOXPHSTWW1 MC UMAGCbb 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_3G_BAG_GEb_EN11 LU.S720B.084...
  • Page 186 EMEA Middle East AOD250-1BGb EMEA Middle East AOD250-1BGb EMEA Luxembourg AOD250-1BGb EMEA Eastern Europe Appendix A Acer Part No Description LU.S720B.036 AOD250-1BGb AOXPHSTDE1 MC UMAGCbb 1*1G/160/BT/6L/ CB_bg_0.3D_3G_GEb_DE51 LU.S720B.035 AOD250-1BGb AOXPHSTDE1 MC UMAGCbb 1*1G/160/BT/6L/ CB_bg_0.3D_3G_GEb_DE12 LU.S720B.023 AOD250-1BGb AOXPHSTEU7 MC UMAGCbb 1*1G/160/BT/6L/ CB_bg_0.3D_3G_GEb_SL11...
  • Page 187 Middle East AOD250-0BGb EMEA Eastern Europe AOD250-0BGb EMEA Italy AOD250-0BGb EMEA Italy AOD250-0BGb EMEA Greece Acer Part No Description LU.S720B.014 AOD250-1BGb AOXPHSTES1 MC UMAGCbb 1*1G/160/BT/6L/ CB_bg_0.3D_3G_GEb_ES22 LU.S720B.019 AOD250-1BGb AOXPHSTHU1 MC UMAGCbb 1*1G/160/BT/6L/ CB_bg_0.3D_3G_GEb_HU14 LU.S720B.033 AOD250-1BGb AOXPHSTNO1 MC UMAGCbb 1*1G/160/BT/6L/ CB_bg_0.3D_3G_GEb_NO12 LU.S720B.010...
  • Page 188 AOD250-0BGb EMEA Denmark AOD250-0BGb EMEA Belgium AOD250-0BGb EMEA Middle East AOD250-0BGb EMEA Middle East Appendix A Acer Part No Description LU.S720B.070 AOD250-0BGb AOXPHSTAT1 MC UMAGCbb 1*1G/160/3L/ CB_bg_0.3D_3G_GEb_DE11 LU.S720B.075 AOD250-0BGb AOXPHSTDE1 MC UMAGCbb 1*1G/160/3L/ CB_bg_0.3D_3G_GEb_DE51 LU.S720B.074 AOD250-0BGb AOXPHSTDE1 MC UMAGCbb 1*1G/160/3L/ CB_bg_0.3D_3G_GEb_DE12...
  • Page 189 EMEA Sweden AOD250-1BGk GCTWN AOD250-1BGk AOD250-1BGk AOD250-0BGk Australia/New Zealand AOD250-1BGk Thailand AOD250-1BGk Thailand Acer Part No Description LU.S720B.050 AOD250-0BGb EM AOXPHSTME2 MC UMAGCbb 1*1G/160/3L/ CB_bg_0.3D_3G_GEb_AR12 LU.S720B.051 AOD250-0BGb EM AOXPHSTME2 MC UMAGCbb 1*1G/160/3L/ CB_bg_0.3D_3G_GEb_AR22 LU.S720B.047 AOD250-0BGb AOXPHSTCH1 MC UMAGCbb 1*1G/160/3L/ CB_bg_0.3D_3G_GEb_IT42 LU.S720B.071...
  • Page 190 WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG Appendix A Acer Part No S2.S710B.001 AOD250-1BGk AOXPHSTWW1 MC UMAGCks 1*1G/160/BT/6L2.6/ CB_bg_0.3D_3G_GEk_ENX1 LU.S710B.002 AOD250-1BGk AOXPHSTAU1 MC UMAGCks 1*1G/160/BT/6L/ CB_bg_0.3D_3G_BAG_GEk_EN11 S2.S740B.003 AOD250-1BGr AOXPHSTWW1 MC UMAGCrr 1*1G/160/BT/6L2.6/5R/ CB_bg_0.3D_3G_BAG_GEk_ENX1 S2.S740B.004 AOD250-1BGr AOXPHSTWW1 MC UMAGCrr 1*1G/160/BT/6L2.6/5R/...
  • Page 191 Memory Model AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb...
  • Page 192 Memory Model AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb...
  • Page 193 Memory Model AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb...
  • Page 194 Memory Model AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-0Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bb...
  • Page 195 Memory Model AOD250-1Bb NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-15k NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk...
  • Page 196 Memory Model AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-0Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Bk...
  • Page 197 Memory Model AOD250-1Bk NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-15r NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-0Br...
  • Page 198 Memory Model AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-0Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br...
  • Page 199 Memory Model AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Br NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-15w NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw...
  • Page 200 Memory Model AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw...
  • Page 201 Memory Model AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-1Bw NLED10.1 SO1GBI WSVGAG AOD250-0Bw NLED10.1 SO1GBI WSVGAG AOD250-...
  • Page 202 Memory Model AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250-...
  • Page 203 Memory Model AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250-...
  • Page 204 Memory Model AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 1BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250-...
  • Page 205 Memory Model AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250-...
  • Page 206 Memory Model AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250- NLED10.1 SO1GBI 0BGb WSVGAG AOD250-...
  • Page 207 Memory Model AOD250-1BG NLED10.1 SO1GBI WSVGAG AOD250-1BG NLED10.1 SO1GBI WSVGAG AOD250-1BG NLED10.1 SO1GBI WSVGAG AOD250- NLED10.1 SO1GBI 1BGw WSVGAG AOD250-1BG NLED10.1 SO1GBI WSVGAG Memory HDD 1 Card (GB) Reader N160G 5 in 1- B5.4K Build in N160G 5 in 1- B5.4K Build in N160G...
  • Page 208 Appendix A...
  • Page 209: Test Compatible Components

    Appendix B Test Compatible Components This computer’s compatibility is tested and verified by Acer’s internal testing department. All of its system ® ® functions are tested under Windows XP Home, Windows XP Pro environment. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests.
  • Page 210: Windows Xp Environment Test

    Windows XP Environment Test Vendor Type GTM380E UNDP-1 Option GTM382E GTM380E UNDP-1 Option GTM382E GTM380E UNDP-1 Option GTM382E GTM380E UNDP-1 Option GTM382E Adapter DELTA LITE-ON HIPRO Audio Codec Realtek ALC272X Battery SANYO 3CELL2.2 SANYO 3CELL2.2 SONY 3CELL2.2 SONY 3CELL2.2 PANASONIC 3CELL2.2 PANASONIC 3CELL2.2...
  • Page 211 Vendor Type SIMPLO 3CELL2.2 SIMPLO 3CELL2.2 SANYO 6CELL2.6 SANYO 6CELL2.6 SANYO 6CELL2.2 SANYO 6CELL2.2 SONY 6CELL2.2 SONY 6CELL2.2 SONY 6CELL2.6 SONY 6CELL2.6 SIMPLO 6CELL2.2 SIMPLO 6CELL2.2 SIMPLO 6CELL2.2 SIMPLO 6CELL2.2 SIMPLO 6CELL2.6 SIMPLO 6CELL2.6 SIMPLO 6CELL2.6 SIMPLO 6CELL2.6 Bluetooth Foxconn BT 2.0 Appendix B Description...
  • Page 212 Vendor Type Camera Suyin 0.3M LDV Liteon 0.3M LDV Card Reader 5 in 1-Build INTEL ATMN270B INTEL ATMN280B SEAGATE N160GB5.4 TOSHIBA N160GB5.4 HGST N160GB5.4 N160GB5.4 Keyboard None 8KB-FV1 Black Atheros AR8114 NLED10.1 WSVGAG SAMSUNG NLED10.1 WSVGAG NLED10.1 WSVGAG NLED10.1 WSVGAG NANYA SO1GBII6 MICRON...
  • Page 213 Vendor Type SAMSUNG SO512MBII HYNIX SO512MBII NANYA SO1GBII6 MICRON SO1GBII6 ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX SO1GBII6 SAMSUNG SO512MBII HYNIX SO512MBII NANYA SO1GBII6 MICRON SO1GBII6 ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX SO1GBII6 SAMSUNG SO512MBII HYNIX SO512MBII NANYA SO1GBII6 MICRON SO1GBII6 ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX...
  • Page 214 Vendor Type NANYA SO1GBII6 MICRON SO1GBII6 ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX SO1GBII6 SAMSUNG SO512MBII HYNIX SO512MBII NANYA SO1GBII6 MICRON SO1GBII6 ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX SO1GBII6 SAMSUNG SO512MBII HYNIX SO512MBII NANYA SO1GBII6 MICRON SO1GBII6 ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX SO1GBII6 SAMSUNG SO512MBII HYNIX...
  • Page 215 Vendor Type ELPIDA SO1GBII6 SAMSUNG SO1GBII6 HYNIX SO1GBII6 SAMSUNG SO512MBII HYNIX SO512MBII NB Chipset INTEL 945GSE SB Chipset Intel ICH7M Software McAfee VGA Chip None Wireless LAN Foxconn 3rd WiFi BG Appendix B Description Memory ELPIDA SO-DIMM DDRII 667 1GB EBE11UE6AESA-6E-F LF 64*16 0.065um Memory SAMSUNG SO-DIMM DDRII 667 1GB M470T2864EH3-CE6 LF 64*16 0.055um...
  • Page 216 Appendix B...
  • Page 217: Online Support Information

    This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d.
  • Page 218 Appendix C...
  • Page 219: Index

    Numerics 3G Cover Removing Replacing 3G Module Removing Replacing AC Power Jack Removing Replacing Antennas Removing Replacing Battery Pack Removing Replacing BIOS ROM size ROM type vendor Version 19–27 BIOS Utility Advanced Boot Exit Navigating Save and Exit Security System Security Bluetooth Module Removing Replacing...
  • Page 220 Top View Keyboard Removing Replacing Keyboard Failure LCD Bezel Removing Replacing LCD Brackets Removing Replacing LCD Cable Removing Replacing LCD Failure LCD Module Removing Replacing LCD Module Disassembly Flowchart LCD Module Reassembly Procedure LCD Panel Removing Replacing Lower Covers Removing Replacing Main Module Reassembly Procedure Main Unit Disassembly...
  • Page 221 Touch Pad hotkey Touch Pad Failure TouchPad FFC Removing Replacing Troubleshooting Built-in KB Failure Internal Microphone Internal Speakers LCD Failure No Display 129, 133 Other Failures Power Button Power On Touch Pad WLAN Undetermined Problems Upper Cover Removing Replacing USB Board Removing Replacing USB Failure (Rightside)

This manual is also suitable for:

Aspire one series