Special Features - Bushnell ImageView 11-1211 Instruction Manual

Special Features
Mode
Self-Timer
Video
Sequence Shot
ImageView 111211 1LIM draft.indd8 8
Icon Settings
Clock 10 sec delay
Video 320x240 pixels per
Camera frame, 10 fps rate.
Three 3-shot photo
overlapping sequence
frames
Description
Press SNAP while clock icon is showing, a photo
will be taken after approx. 10 sec delay. This can be
used to avoid accidently shaking the camera when
the SNAP button is pressed. If the remote shutter
cable is available, it should be used instead of the
self timer when the camera is tripod mounted. The
timer automatically cancels after use.
Press SNAP while the video cam icon is showing-
recording starts in a few seconds. A red icon appears
in the lower left corner when shooting or playing
back a video clip. After 10 seconds, recording
automatically stops and the camera returns to
normal photo mode. Press SNAP if you wish to
stop recording sooner.
Press SNAP while the sequence icon is showing to
shoot a series of 3 photos instead of a single frame.
After taking the series of photos, the camera returns
to normal operating mode.

3/12/07 4:01:04 PM