Kenwood DDX7018BT Instruction Manual page 32

Bluetooth® Bluetooth®
Making a call
1
Display the phone control screen.
On the Home screen, touch as follows:
2
Select a method to make a call.
1 From the call history* (missed calls/received
calls/dialed calls)
2 From the phonebook*
3 From the preset list (Page 31)
4 Use direct number entry
5 Use voice dialing
3
Select a contact to make a call.
A When item 1, 2 or 3 is selected in step 2:
30 ENGLISH
• If the selected contact has several phone
numbers, the phone number list is displayed.
Select a phone number to make a call.
To use alphabet search in the phonebook
1 Touch [
A-Z ].
2 Touch the first letter you want to search for on
the keypad.
To search for a number, touch [1].
3 Select a contact you want to call from the list.
• You can select a first name or last name to use
when sorting the list in alphabetical order on the
<TEL SETUP> screen. (Page 32)
B When item 4 is selected in step 2:
Enter the phone number (
call ( 2 ).
• To enter "+", touch and hold [0/+].
• To clear the last entry, touch [BS].
* Applicable only for mobile phone compatible with PBAP (Phone
Book Access Profile).
C When item 5 is selected in step 2:
Say the name of the person you want to
call.
• You can also make voice dialing by pressing and
holding the VOICE on the monitor panel.
• Available only when the connected mobile
phone has a voice recognition system.
• If the unit cannot find the target, "Press [Restart]
to restart the voice recognition process." appears.
Touch [Restart], then say the name again.
• To cancel voice dialing, touch [Stop].
Switching between two connected devices
You can change the device to use when two devices
1 ), then make a
are connected.
On the phone control screen:
The active device is highlighted.