Lcd Contrast; Beep Tone Level; Installation; General - GME TX4610 Instruction Manual

5. Press and hold the
beeps, to store the setting.
To display S-Meter, Battery Voltage or
Frequency/Alpha label on 'Listening' channels
(81 – 99):
1. Select a channel from 81 – 99.
2. Press and hold the
beeps.
3. Briefly press the
until 'S-MET' (S Meter), 'bATT' (Battery) or
'ALPHA' is displayed.
4. Press the or
preferred choice of S-MET (S Meter), bATT
(Battery) or ALPHA.
5. Press and hold the
beeps, to store the setting.

LCD CONTRAST

Use this setting to adjust the LCD display
contrast.
To Adjust the Contrast
NOTE: Adjusting the contrast may affect
the viewing angle.
1. Press and hold the
beeps.
2. Briefly press the
'LCDXX' is displayed (where XX is a number
from 0 to 15).
3. Press the or
contrast setting. LCD15 is the highest
contrast setting
4. Press and hold the
beeps, to store the setting.

BEEP TONE LEVEL

Use the Beep Tone setting to adjust the volume
level of the keypad beeps.
To adjust the keypad beeps
1. Press and hold the
beeps.
2. Briefly press the
'beep' is displayed.
PAGE 2 4
MENU
key until the radio
MENU
key until the radio
MENU
key repeatedly
keys to select your
MENU
key until the radio
MENU
key until the radio
MENU
key repeatedly until
keys to select the required
MENU
key until the radio
MENU
key until the radio
MENU
key repeatedly until
IN ST R UC T IO N M ANUAL
3. Press the or
keypad beep level. Selecting 'beep0' will turn
the keypad beeps off.
4. Press and hold the
beeps, to store the setting.
IN S TAL L AT I O N

GENERAL

Panel Mounting
Upright Mounting
It is advisable to spend a little time selecting the
best location for your TX4610. The mounting
bracket can be rotated above, below or behind
the radio enabling the radio to be mounted in a
wide range of locations. In addition, an optional
flush mounting kit allows the radio to be flush
mounted in a panel or dashboard.
Keep the following points in mind when
choosing a location:
• The TX4610 is designed to meet IP67
specifications which allows for temporary
immersion in water, however we
recommended you select a location that will
minimize excessive exposure to continuous
rain or spray.
keys to select the required
MENU
key until the radio
Overhead Mounting
Flush Mounting
(Optional MK001B
flush mounting kit
available)
MENU SCAN PRI SQL
F DIM QUIET ALPHA
TX 4 6 1 0