Summary of Contents for Campania International Parisienne FT-184
Page 1
FT-184 Parisienne Two Tier Fountain Assembly Instructions Fountain Information: • Professional installation is recommended for this fountain! • This fountain holds approximately 130 gallons of water. • This fountain uses a medium fountain cover but does not cover the basin: FTNCOV-MED •...
Page 2
FT-184 Parisienne Two Tier Fountain Assembly Instructions Professional installation is recommended for this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 3
FT-184 Parisienne Two Tier Fountain Assembly Instructions Step 10 - Using hose clamps, secure both 50" lengths of 5/8" non-kink tubing to the bottom of the large bowl (FT-184D). Step 11 - Feed both pieces of tubing down through the large pedestal (FT-184E) as you lower the large bowl (FT-184D) into place.
Page 4
FT-184 Parisienne Two Tier Fountain Assembly Instructions Step 19 - Cover pump access with the pump cover door (FT-184G). FT-184G (7 lbs) 10"L x 4.25"W x 5.25"H Step 20 - Position the coping with the channel about 6" from the basin (FGB-2030) on the side of the fountain where the pump cord is to come out.
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.